I have a 2008 megan and the bonet release will not work i suspect broken cable is there any way to release the bonet from underneath the car ?
Generally, cable will not break.It might be cable endlock or lever or distrubed cable clamping.see from front under bonnet below the upper panel you will find bannet cable wire going to bannet lock, try n pull it. or pull the locking lever. it will definitely open
SOURCE: renult megane electric roof problem
has to be reset on ECU its a renault so it encrypted software .dealer only hope you can lay the golden egg for them
SOURCE: Emergency Brake Cable Is Broken
Somewhat easy to replace. The part is a dealer item (purchase only from Chevrolet dealer) If you are going to do this yourself, take many photos on the progression of the job to refer back to when putting it back together. Good Luck!
SOURCE: hood release will not release hood cable is not broken
the outer cable may have come loose near the lock, if the grille screws are accessable remove the grille and you will have access to the underside of the lock, you may need a screwdriver to push the lock lever aside to unlock the bonnet
SOURCE: On Pulling Release handle in drivers footwell. No
REMOVED PANEL FROM UNDER THE BUMPER AND REACHED UP TO THE TOP OF BONNET AND LOCATED CABLE. PULLED ON CABLE WHILST 3RD PARTY PULLED BONNET LEVER IN DRIVERS FOOTWELL. BONNET RELEASED.
SOURCE: where is the front headlight fuse for a renult
the fuse is located under the hood in the fuse/relay box.
278 views
Usually answered in minutes!
×