Got car at police auction, no keys. i tried to star car w/ ign out, no go. i installed auto zone chiped key w/ign lock cyl, same thing, no crank. theft light flashes real fast. im sure its the pats...what now. remember i have NO ORIG. KEY so i cant lock unlock door as ive been told to do...help, please? (i cant crank over w/ screw driver at start/sol.).
SOURCE: 2005 ford taurus. Remote entry wont work theft light keeps blinking when key is engaged
HI, I'm reading your problem,
Let me explain something about your car.
2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.
If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.
OK.. I hope this information work for you.
Thank's for submit yous question on fixya.com
SOURCE: 2001 ford taurus wont start and anti-theft light is blinking
Either you may be using a key that you had copied from the original or your chip went bad in your original key. Most of cars now a days have the key censor in the key so if it is the incorrect key it will not start your car or if it does not read that chip it will not start
SOURCE: Spare Key will not start the car.
no you don't have to have it done at dealership. i bought mine on ebay got it cut at walmart and it works. you need the two originals, turn the ignition to on and then off 4 times (i think it was) with the first two then put your spare key in and do the same. and it will work.
http://www.mazda3forums.com/index.php?topic=5340.0
The timing is critical to this procedure, please read through the entire procedure before attempting.
Procedure:
1. Insert one of the pre-programmed transponder keys and turn the ignition to "on", leave on for at least one second (I wait until the red key symbol in the instrument cluster extiinguishes), remove the key from the ignition.
2. Within 5 seconds insert the second pre-programmed key and urn the ignition to "on" for at least one second but no more than 5 seconds (use the key symbol for this as well) then remove the second key.
3. within 10 seconds insert the new key in the ignition and turn the ignition to "on", if you are successful the red key symbol will illuminate then extinguish after about a second.
If you are not successful the red key symbol will flash repeatedly to indicate that you have inserted an invalid key. Remove the key, wait a minute and try it again, it took me a few times to get it perfect and I had done it before.
SOURCE: MY FORD ESCORT 1.6 FINESSE 1997 IMOBILISER FAULT
disconnect the battery for 1 minute and try again -
---quick fix possible with that---
if that makes no difference then I would like to know exactly what model of alarm and immobiliser the car has - what is the maker + model no/serialno of the keyfob for the alarm, I can get the info I need off that.
also you can check the fuse in the alarm if you know where the alarm is situated, it will have a fuse either on an inline fulseholder on as a spade fuse stuck into its casing somewhere - replace the fuse if blown and try again to start the car
------------
tell me the model no of your alarm and immobiliser if no joy after battery/fuses and I can read up on them and see if I can fix your problem...
Testimonial: "thanks for that info ive already tried it with no chane but many thanks for the info"
113 views
Usually answered in minutes!
×