Replace the beeper that makes the sound when you are in reverse.the light will also go out after you replace thet beeper.
Testimonial: "Your solution worked. After I replaced the beeper, park aid system is working like new."
SOURCE: vdc light and brake lights comes ON.
does the master cylinder have enough brake fluid in it, low fluid level commonly causes those two lights to come on you may wanna check your brake fluid level.
SOURCE: Gear box Malfunction in the
Sounds like your shift cable has gotten out of sync, If this is the case, you take the shify cable loose from the link on transmission, then shift link to park position , then adjust cable to line up to the link and rehook. I don't know exactly how your set up looks but the procedure is the same on most cars.
SOURCE: 04 Nissan quest will not go into park. It will
Gear linkage either needs adjustment or has a broken part
SOURCE: How can permanently disable the
If you're ok about messing with the wiring on your vehicle, you can connect the factory disarm wire permanently to a body ground, to disable the factory security. The factory disarm wire is;
Factory Disarm
Red/Black (-)
Driver's Kick Panel
671 views
Usually answered in minutes!
Where is the beeper at? HOw do I get to it?
×