Fuse #11 keeps blowing. car will not start.
SOURCE: I have a 2002 PT Cruiser That I put a new Batter
you should never install a battery backward double check everything before ever starting your car. your lucky for the fuses or you could of had a electric fire..you need to remove the aircleaner and there is a fuse block underneath it. theres also a post there usually with a plastic cover on it that post is for ever if you have to jump your car this is a positive post, but next to it is the fuse block. hopefully you didn't do anything to the computer.
SOURCE: Chrysler PT Cruiser interior light fuse blown
hi ,
remove pos batt cable 1st
I would start examining the door switches since they are a constantly cycling part, Im not exactly sure how many accessories run off the door switches but I would examine the drivers door switch, study how the switch removes from the door, gently pull switch assembly out, being careful not to yank wires loose. remove it and look for arcing marks or soot, try all the doors, then I would disassemble the dome light itself if you cant find it, if you find the short you should reinsulate with thermoheat wrap heated with a hairdryer and maybe even some extra electric tape.
good luck
JM
SOURCE: my 2002 pt cruiser lost power steering suddenly
check to see if the serpantine belt is still there. It sounds like like it broke. this belt runs all of the accesories on the vehicle including the water pump. So if this happened it probably starting running hot too
SOURCE: 2006 pt cruiser ignition fuse blown, keeps blowing
you have a short circuit you will need to eliminate that & your fuse wont keep blowing
1,012 views
Usually answered in minutes!
We do not have access to the 2002 owners manual which contains the fuse information, so please explain what this fuse powers.
×