Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 05, 2012

Bmw m52 con rod bolts torque - 528i BMW Cars & Trucks

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Sep 08, 2008

SOURCE: 2005 Tucson

camshaft sprocket bolt 58-72 ft. lbs. crankshaft pulley bolts 108-132 ft. lbs. crankshaft pulley center bolt 80-94 ft. lbs. cylinder head bolts cold engine 65-72 ft. lbs. warm engine 73-80 ft. lbs. cylinder head rear cover bolts 69-86 in. lbs. flywheel/Driveplate bolts 94-101 ft. lbs. intake/Exhaust manifold nuts/Bolts 11-14 ft. lbs. jet valves 13-16 ft. lbs. main bearing cap bolts 36-39 ft. lbs. oil pan bolts 51-69 in. lbs. oil pan nuts 43-60 in. lbs. oil pan drain plug 33 ft. lbs. oil pump cover bolts 72-84 in. lbs. oil pump relief valve plug 29-36 ft. lbs. oil pump sprocket nut 25-28 ft. lbs. Rear oil seal retainer bolts 84-108 in. lbs. rocker arm shaft bolts 14-15 ft. lbs. rod bearing cap nuts 23-25 ft. lbs. silent shaft sprocket nut 22-28 ft. lbs. spark plugs 15-21 ft. lbs. thermostat housing-to-Engine bolts 86-114 in. lbs. timing belt tensioner bolt 32-40 ft. lbs. valve cover bolts 43-61 in. lbs. water pump-to-Engine bolts alternator brace bolt 14-20 ft. lbs. all others 9-11 ft. lbs. water pump pulley bolts 72-84 in. lbs.

Ad

Roger Foster

  • 701 Answers
  • Posted on Apr 15, 2009

SOURCE: torque specs for toyota tercel

Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Anonymous

  • 1 Answer
  • Posted on Apr 21, 2009

SOURCE: Need torque spec for 2000 Cirrus outer tie rod ends

45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock nut

Anonymous

  • 92 Answers
  • Posted on Sep 20, 2009

SOURCE: torque specs for 1998 tercel 1.5L

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Anonymous

  • 106 Answers
  • Posted on Nov 17, 2009

SOURCE: i need bolt torque specs for a 2006 chevy cobalt

if you just go to a mecanic and ask what are the specks on that they should know but i think if you just tighten them down with an impact wrench till it is really tight after ou start the car it will run like **** then it will work its self out

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Tightening torque for bolts.

buy the service manual?
0helpful
1answer

Want isusu reward 4hg1 engine torque specification

I need all the specs of Isuzu npr 4hg1 engine.Cylinder head bolts torque, crankshaft bolts torque, connecting rod caps bolts torque
.
0helpful
1answer

I need torque specs 14B coaster bus.cyl head and con rod torque

I need torque specs for toyota coaster bus 14B engine, con rod bearing cap bolts and main bearing
0helpful
2answers

2004 Bmw x5 valve cover torque specs

valve cover gasket torque spec? - Bimmerforums

www.bimmerforums.com/.../showthread.php?...valve-cover...torque-spe...
Dec 7, 2012 - Remember the little rubber grommets around the cover bolts? ... Location: alabama; Posts: 5,537; My Cars: 2002 bmw 325 ... Torque spec for the M52 valve cover bolts is 89 inch-pounds / 7.4 ... 1976 - 1989 (E24) · 2004+ (E63, E64) ... 2012+ X1 (E84) · 2003+ X3 (E83,F25) · 1999+ X5, X6 (E53, E70, E71). Valve Cover Bolt Torque Specs
Oct 25, 2014
Valve cover screw torque specs?
Nov 9, 2012
leaking valve cover gasket
Dec 29, 2011
How specific for torque specs?
Dec 27, 2011
More results from www.bimmerforums.com
0helpful
1answer

Main /con rod torque

Here are the torque specs you requested:
MAIN BRG CAPS= 29FT/LBS THEN TIGHTEN AN ADDITIONAL 90 DEGREES in sequence(two step process)
ROD BEARING CAPS= 18 FT/LBS
CYLINDER HEAD BOLTS= 29FT/LBS + 90 degrees + another 90 degrees in sequence from the center out ward, (3 step process).
Please let me know if you have any questions
0helpful
1answer

What is the torque for the main and rod bearings on a 2005 dodge stratus 2.7L automatic v6?

Main bearing cap bolts there is a outer cap bolt that are torqued to 20 ft lbs + 1/4 turn. Then there a inner cap bolt that are torqued to 15 ft lbs + 1/4 turn. Con rod bolts are torqued 20 ft lbs +1/4 turn
1helpful
1answer

Rod torque spec

What are the torque specifications for a 1969 mustang boss 7/16 con rod bolts? The con rod part number is C9ZF-D.
0helpful
1answer

I am installing an m52 engine from a 1996 bmw 328i into a 1998 bmw 528i, but the torque converter and flywheel lock up when I tighten the outer engine to trans bolts. If I loosen the bolts, they move...

Hi! If, as you say, your torque converter is fully engaged, then the only thing I can think is that the unit doesn't match! It may be that the dimensions between the two are different - meaning that when you try to fully tighten the bolts, the 1st motion shaft bottoms out in the flywheel support bush (or similar). Might be worth speaking with a main BMW dealership to get advice/info?
0helpful
1answer

Torque siz for engin

Hello

Engine code = M52
Size = 2.8
BHP = 193
Torque = 206lb/280nm

Hope this helps. Please don't forget to rate me.
Not finding what you are looking for?

2,012 views

Ask a Question

Usually answered in minutes!

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...