Hyundai Motor 2003 Elantra Logo
Posted on Mar 05, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Replace inner door handle - Hyundai Motor 2003 Elantra

Answer This Question

1 Answer

raj somaiya

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Hyundai Master 5,370 Answers
  • Posted on Mar 05, 2012
raj somaiya
Hyundai Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: Nov 12, 2010
Answers
5370
Questions
0
Helped
3571085
Points
14579

For Doors not getting open with remote or key problem,or door parts removal ,there are help links provided below. Click the link below to go through its procedure and troubleshoot the problem: ----
Drivers side front door will not open from inside or outside?

http://technoanswers.blogspot.com/2012/01/ford-f-350-crew-cab-drivers-side-front.html

----------

Car door will not close?
http://howtobyme.blogspot.com/2011/11/car-door-will-not-close.html

--------

All power door locks not working?
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

----------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html
---------------
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

----------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

---------
Truck Door will not close?

http://schematicsdiagram.blogspot.com/2011/12/ford-truck-door-will-not-close.html

-----------
Where is Cars Door control Module located?

http://schematicsdiagram.blogspot.com/2011/12/where-is-cars-door-control-module.html

--------
Power door locks not working?

http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

-----------
Door ajar light stays on?

http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

----------
Door locks not working?

http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

----------
Front Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/front-door-dis-assembly-diagram-for.html

---------
Rear Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/rear-door-dis-assembly-diagram-for.html

--------
How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

--------
Doors will not open with Remote?

http://schematicsdiagram.blogspot.in/2012/02/lexus-doors-will-not-open-with-remote.html

--------

How to replace Door Hatch ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-hatch-on-acura-integra.html

---------

How to remove Doors?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-doors-on-acura-integra.html

-------`-

How to Replace Doors?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-doors-on-audi-a4-and-vw.html

--------

Remote will not unlock Rear door?
http://schematicsdiagram.blogspot.com/2011/12/remote-will-not-unlock-rear-door-on-gmc.html

--------

Door locks or windows not working on car?
http://schematicsdiagram.blogspot.com/2011/07/door-locks-or-windows-not-working-on.html


----------
Central locking not working?

http://schematicsdiagram.blogspot.in/2012/03/this-is-how-system-operates.html




This will help.

Thanks.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Inside door handle is loose. how to fix handle on my 2003 kia Sedona mini van?
you need to open the inside door and check for loosing screws or anything that looks loose or out of place
Read full answer
Oct 11, 2013 • Kia Sedona Cars & Trucks
0helpful
1answer

Passenger door handle broke of the outside of Nissan pathfinder, now the door wont open from the inside or out. how can we get the door open?
Remove the door's inner (interior) panel and inspect the trailing edge of the inside of the door. You should be able to see the door linkage from both the inner door handle and (what's left) of the outer handle (try moving the inner handle to see how the linkage is routed. I suspect that when the outer handle broke, its linkage dropped onto the inner handle's linkage and jammed it. With a long screwdriver, try moving the inner handle linkage to release the door latch and then replace the outer handle and its linkage (a salvage yard may be the best source and a Mitchell body repair manual should show hoe the linkage is routed and attached. Good luck.
Read full answer
Oct 10, 2013 • Cars & Trucks
3helpful
3answers

How do I replace the driver side outside door handle on my 1996 Toyota Tacoma?
Make sure window is up. Remove inner door panel. Disconnect latch mechanism. Should be a few nuts holding handle on. Unscrew them. Install front door outside handle frame sub-assembly. Using a torx wrench (Usually T30) install the outside handle.
Read full answer
May 04, 2011 • Toyota Tacoma Cars & Trucks
0helpful
2answers

How to install outer door handle of Ford Focus
remove inside door panel, remove bolts/screws of old door handle, install new handle
Read full answer
Sep 30, 2010 • Ford Focus Cars & Trucks
0helpful
1answer

Broken door handle
Which door, front doors or slider. Front door handles are readily available at most auto parts stores. Pull off the inner door panel and access the inner 10 mm nuts which hold the handle to the door. Once the nuts are off pull the handle out from the outside and remove the actuator rod from the handle. Install the rod on the new handle and replace it in the door making sure the rod slides into its corresponding female connector in the door before attaching the nuts. Its a lot of tight finger work but you can do it with a little patience.
Read full answer
Aug 10, 2010 • 1995 Chevrolet Lumina Apv
0helpful
1answer

Installing driver side interior door handle
pull the inner panel off by first un screwing the two screws located on the handle portion of the panel(they may have plastic hadeaway covers over the heads) then remove the window rolldown handle(if so equipped,manual window)then pull the plastic trangle from the inner of the mirror(this little tri angle keeps the trim down and secure on the door. then pull the palnel directly out there are small clasp pins in behind the panel try not to break these(but they do sell replacements at your local auto store) you will have to get ALL of these free then wiggle the panel up releasing it from the inner shell of the door and and window. you should now have a clean view of the handle. you will now need to droll out the rivit holding the handle to the inner steel of the door. pull the handle forward and it should be released from the inner steel now there clips holding the "rods" to the handles back side, they should have a little piece clipped to the rodto un clip these you need only push them off with your thumb. then replace handle with the new one, and uce a large steel screw to secure the handle when replacing back on door.
Read full answer
Nov 21, 2009 • 1998 GMC Sierra
2helpful
1answer

How do I remove the door panel and replace the inside door handle
PLEASE DON'T FORGET TO RATE!!

Door Panel
  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with remote control mirrors, remove the remote mirror escutcheon, then disengage the end of the mirror control cable from the escutcheon.
5670a53.gif
Door lock remote control handle

849dcc4.gif
Removing the clip from inside the door handle

3. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switches and the cigar lighter (if equipped) from the electrical harness.
4. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.

7c4bfcc.gif
View of the armrest switch cover plate and remove mirror cable attachment

  1. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.

e8e7539.gif
Exploded view of the window regulator handle

4df80bc.gif
Exploded view of the door trim panel

  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switches and cigar lighter (if equipped) harness connectors, then install the cover plate and secure using the plate screws.
  4. If equipped with remote control mirrors, engage the control cable, then install the remote mirror escutcheon.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.
3e5ae04.gif
Exploded view of the 2-piece door trim

  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switch
from the electrical harness.
  1. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.
  2. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.
  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switch harness connector, then install the cover plate and secure using the plate screws.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.
Read full answer
Nov 16, 2009 • 1987 Chevrolet Monte Carlo
0helpful
1answer

How do I replace a '94 chev Astro outside drivers door handle
You first have to remove the inner door panel by taking the screws out of the inner handle and arm rest. the outer edges of the inner door panel either has screws or it has clips that can be pulled out. after you remove the panel you need to roll up the window and you will be looking at the back of the handle. simply un hook the clips that hold the lockrod and the inner opener rod and unbolt the outside door handle. reverse the prosses and walla.
Read full answer
Sep 19, 2009 • 1990 Chevrolet Suburban
2helpful
1answer

The inner drivers door handle broke, I mean it just moves but will not open the door.It appears that something either broke or asome linkage came lose. How difficult is it to replace?
It is usually a tab on the the back of the handle that breaks. But the handle isn't too hard to replace.
Read full answer
May 12, 2009 • 2001 Mazda Tribute
1helpful
1answer

Replacement of Inside drivre side door handle
remove the plugs in the the handle. (the part that you hold to close the door),then unscrew should be 2 large phillips heads. remove window winder if not electric, remove plastic cover around door release handle. remove inner mirror trim. then remove door trim carefullly pull it towards you it should pop out every couple of inches around the edge. remove inner plastic .then remove handle from door and from metal rod should be a plastic locking clip just pop it too the side. fit new handle then reverse these instructions.
Read full answer
May 23, 2008 • 1995 Toyota Camry
Not finding what you are looking for?

View Most Popular

Motor 2003 Elantra

  • Cars & Trucks

Related Question

Inside door handle is loose. how to fix handle on my 2003 kia Sedona mini van?

  • Kia Sedona Cars & Trucks

Related Topics

675 views

Ask a Question

Usually answered in minutes!

Popular Questions

No sound from speakers

2011 Hyundai Elantra Limited

I need to replace the purge valve in my 2003 Hyundai Elantra. I have the new purge valve and am ready to install it. However, I have no idea where the old one is located. I only know that it's under t

2003 Hyundai Elantra

Bluetooth reset

Hyundai Elantra Cars & Trucks

Diagram for 2002 Hyundai elantra fuse box

Hyundai Motor 2002 Elantra

Location of IAT sensor in the car

2004 Hyundai Elantra

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...