2001 Ford Ranger Regular Cab Logo

Related Topics:

Posted on Oct 04, 2008

Truck seems to stall while driving.

I have a 5 speed 2001 Ford ranger Truck. When I and changing the gears or just driving in 5th gear, the truck seems to jumps as though it's not getting the gas. I put injection bost and cleaner in the tank, yet it does the same. Sometimes it jumps badly.
Thanks,
Lewis

  • Anonymous Jan 11, 2009

    I have the same problem. So I changed the spark plugs, distributor, and spark blug wires. When I did I found that the spark plug in cylinder number 3 was soaked with fuel. So I change the fuel injector in every cylinder and that did it.

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 06, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 06, 2009
Answers
1
Questions
0
Helped
487
Points
2

I have a 1980 GMC 3/4 ton stick shift truck and this past week my truck seems like its stalling as it drives. i had the oil and fuel filter changed this past thursday and it keeps stalling.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

I have a 1988 ford ranger 2.3l 5speed or 4speed w/over drive. Since i got the truck i have not been able to get it in 5th gear wont even budge. Why?

Susan, either linkage is damaged, out of adjustment, 5th gear is damaged and gone or you have a 5 speed shift knob on a 4 speed transmission.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
1helpful
1answer

My ford ranger 4x4 5 spd. has started howling when I'm going down the road and it only stops when I either push in on the clutch or put it in neutral.

What speeds, does it make more noise in 4 wheel drive or the same. There are several possibilities, need more information. Does it howl in all the gears or in 5th gear only.
0helpful
1answer

Ford ranger forum

throw out bearing might be bad
0helpful
1answer

2003 Ranger Missing while driving. Stalling when idling

It sounds like a timing problem....First, have you had a tuneup lately? If not, parts may be corroded or burnt. The fuel filter may need to be changed...Next, the timing chain may need replacing...Check it out!
0helpful
1answer

I have a 94 Ford Ranger with a 4.0 engine and a 5 speed trans. The truck has been sitting for a while and now when I drive it the shifting is hard going into 2nd and 3rd. It shifts fine when sitting...

the shift sinkcranizers are dry .may have to pull the shifter and use some white lithum grease on it work the shifter from gear to gear working in the grease drive the truck for about 25-30 miles and change trans fluid
0helpful
2answers

1994 ranger in 3rd and 5th gears, it has a loud whine to it.

Mine has a high pitched whistle at high rpms and I can't figure it out. But mines def not the tranny. I'm thinking it's a vacuum line somewhere. It's a 97 2.3l manual. The colder it is the louder...
0helpful
2answers

1991 ford ranger stalls when in gear...

sounds like a electrical problem somewere
1helpful
1answer

5-speed transmission making noise in 3rd and 5th gear

are u sure the alignment (side to side, up and down) of the trans on the bell housingis not out of spec, that will burn the bearings out very quickly.
2helpful
2answers

'97 Ford Ranger-Please Help!

IT LOOKS LIKE YOUR FUEL PUMP IS GOING BAD
Not finding what you are looking for?

497 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...