SOURCE: Trunk lid won't open, 2004
Hello
You will need to release the latch manually by whatever means that takes, and then test it to find out why it has stopped working, that will mean some basic electrical testing for an electrical signal being send from the release switches to the latch, so you should have battery plus and battery negative when the switch to release the latch is activated. I suspect the latch is just defective. As far as the use of WD40 goes you have done more harm than good in this type of a electro-mechanical device. There is no cable release kit, you will need to replace the needed parts from the dealer parts dept., the part is not available from any other source except a GM dealer (any GM dealer can order it) parts dept.
70 views
Usually answered in minutes!
×