1995 Audi A6 - Answered Questions & Fixed issues
Audi a6 bonnet stuck need diagram
IF U HAVE A BROKEN WIRE THEN U HAVE TO TAKE OUT THE FRONT MASK CONTAINING THE AUDI LOGO.U HAVE TO CAREFULLY DRILL A HOLE APROXIMATELLY 25mm AT THE PLASTIC BEHIND SO THAT U CAN ACCESS THE LOCK.AFTER THAT ALL IS EASY.LOCATE THE WIRE WITH THE BALL LOOK ENDING AND USE A BIG LONG SCREWDRIVER TO PUSH THE HANDLE AND LIFT.IF U NEED MORE LET ME KNOW.
2/14/2015 6:58:44 PM •
1995 Audi A6
•
Answered
on Feb 14, 2015
•
74 views
My audi a6 with automatic trany wont shift out of park and cant figure out why
dont pabnic it prob wont be transmission,, more likely a electric problem ,,, look at owners manual ,,, there is a lock solenoid to release park,,, there is a way to overridebit if solenoid breakes down,,,
12/1/2013 2:57:32 AM •
1995 Audi A6
•
Answered
on Dec 01, 2013
•
554 views
How to test cam sensor 95 audi a6 2.8
Hi David, Remove the sensor and hook up an analogue voltmeter to the two cables. Set the meter at mili voltage and pass a metal screw driver across the business end of the sensor, without coming into contact with it. You should have a distance of about 0.5 of a millimeter gap between the sensor and the screw driver. The voltage generated is very small and the pulse will only occur as the field is broken. In other words its a two man job. If the needle of the meter moves the sensor is fine, if not replace it. It is very important to use an analogue meter as the pulse is too small to be noticed on most digital meters. Regards John
10/17/2012 1:14:59 PM •
1995 Audi A6
•
Answered
on Oct 17, 2012
•
2,159 views
Fans on a Audi A6 don't come on, is it the thermoswitch, if so where is it?
You can put those on an independent switch. The sensor for the gauge is mounted on the bottom of the coolant inlet
neck on the left side of the engine, it is actually called an Electronic
Thermoswitch. The fan relay has most likely gone bad.Here's the fan relay location, remove the kick panel above driver side
feet. It's the one behind the big #287. Double check on the coolant
sensor located behind the engine on the drivers side.
10/16/2012 7:33:04 PM •
1995 Audi A6
•
Answered
on Oct 16, 2012
•
337 views
I have a audi 500 sel 2.8 v6, it start and run
you may want to check the pcv valve. i had the same problem, and it is because if the valve is bad then the air is nos passing through. it costs around 50 dls at the dealer and it is very easy to change.
6/29/2011 2:57:09 PM •
1995 Audi A6
•
Answered
on Jun 29, 2011
•
360 views
Engine gets overheated
Check for the water pump working or check the blocked pipe hose of the radiator or the clutch magnet in the cooling fan.
thanx
6/16/2011 2:08:58 PM •
1995 Audi A6
•
Answered
on Jun 16, 2011
•
78 views
Not finding what you are looking for?