2005 Nissan Quest 3.5 - Answered Questions & Fixed issues

0helpful
1answer

Quest idles rough and when accelerating and service engine light is flashing

Nobody can answer correctly until you (or let someone) read OBD code. "Check Engine Light flashing" means there is (or are) potential error on system. (Flashing = Potential. maybe temporally, stays on = permanent. need to fix) there are 100s of error codes. When you go Autozone or some autoparts store maybe AAA, they can connect "OBD code reader" and read error code for you for free. You can buy cheap code reader under $30 for now and future use. Code may show like P0301, it means misfire on #1 cylinder for example. sometimes just gas cap not tight closed show error code. Reading OBD error code is starting point .
2/26/2016 10:55:00 PM • 2005 Nissan... • Answered on Feb 26, 2016 • 471 views
0helpful
1answer

How many cataylitic convertors are on this vehicle and how much do they cost?

Possibly, Go to your Auto parts store. you will get all questions answered. Some will lend With deposit needed tools.
3/21/2015 2:03:29 AM • 2005 Nissan... • Answered on Mar 21, 2015 • 47 views
0helpful
1answer

Firing order diagram needed for 2005 nissan quest

I have problem w/water pump, but I am not sure if this pump connects together with the timing belt.
6/6/2013 1:45:11 PM • 2005 Nissan... • Answered on Jun 06, 2013 • 2,306 views
0helpful
1answer

I'm getting a P0420 on my Nissan. What do I have to do to fix it?

It depends on what the main problem is.Code 420 is for a problem with the catalytic converter. The converter is not working correctly, but the actual reason would need to be investigated. It could be the cat itself, or something else like the exhaust system or fuel system.
4/30/2013 3:11:59 AM • 2005 Nissan... • Answered on Apr 30, 2013 • 502 views
0helpful
1answer

How to release transmission dipstick on

Just pull. If it has a spring hook on the end of it, then you will have to release this before pulling.
11/7/2012 1:17:52 PM • 2005 Nissan... • Answered on Nov 07, 2012 • 235 views
0helpful
1answer

My tcs light, slip light, and service engine light all came on when I had to break hard in my 2005 Nissan Quest. Ran ok going home but would not down shift going uphill as normal.

Hi Laurence, take the vehicle for a diagnostic scan. The faults recorded at that time will be stored in the ECU memory and can be investigated. Have the faults erased after carrying out the scan and see if they come on again during driving. If they do let us know and we'll see what our next course of action should be. Regards John
9/10/2012 6:30:11 PM • 2005 Nissan... • Answered on Sep 10, 2012 • 2,953 views
0helpful
1answer

2005 Nissan Quest low beams are out, but high beams work.

the low beam are burned or check the fuses
4/20/2012 12:05:25 AM • 2005 Nissan... • Answered on Apr 20, 2012 • 305 views
0helpful
1answer

Code P0113-P0183

DTC P0113 - Intake Air Temperature Circuit High Input.The powertrain control module (PCM) monitors the temperature of the air entering the engine. The PCM supplies a 5 volt reference voltage to the Intake Air Temperature (IAT) sensor. The IAT is a thermistor that varies resistance based on temperature. As the temperature increases, resistance decreases. Low temperature results in a high signal voltage. When the PCM sees a signal voltage higher than 5 volts, it sets this P0113 check engine light code. DTC P0183 - Fuel Temperature Sensor Circuit High Voltage. I suggest to check wire connections.
4/24/2012 9:03:09 AM • 2005 Nissan... • Answered on Apr 24, 2012 • 2,236 views
0helpful
2answers

What does the diagnostic code

you can go here.
1/22/2023 6:16:31 PM • Nissan Quest... • Answered on Jan 22, 2023 • 275 views
0helpful
1answer

Location of MAP Sensor in 2012 Nissan Quest

I am 4 months late, but here goes , one more HUNT engine question. if you try to buy one ,none are sold, so where'd you put it if can't buy one, now that is the $64,000 question, no problem told at all just a hunt, endless here, is engine power lacking and some dweeb said find the MAP that does not exist, why you posted? YES! one more useless hunt. yes this engine has MAF< (air meter) not a baro map sensor. the mAF is just behind all air cleaners. just there. no country told. no engine told (yes for USA cars below) that sensor is only used on engines that must have one. 1/2 do and 1/2 dont; but not one clue or VIN number of car told map can also be for EGR only testing,(OBD2 USA) the map has vacuum line or intake manifold port mounted, if not seen there it is NOT THERE. (and is not there) Gen 4 quest , USA I only do USA answers. our car has this v6. only 18,000 made (rare) VQ35DE 3.5L V6 my wild wild guess, engine power lacks.? check all fuses first and scan the PCM 2nd? now that matters., 1: bad engine. (cam VVT or chain guides dead?)low compression. 2: bad spark, bad COP coils and spark plugs bad, 100kmile life. 3: bad fueling too much or too little, fuel pressure dead wrong bad FPR bad, or bad MAF. EGR valve stuck open. gross vacuum leaks there are 20 test to do with 20 tools and meters, post real problem and we work that to the end using tools.
9/22/2022 7:57:42 PM • Nissan Quest... • Answered on Sep 22, 2022 • 81 views
0helpful
1answer

Steps to replacing tag lights on a 2012 Nissan Quest?

Nothing specific to the Quest, but there are two videos for other models https://www.google.com/search?q=2012+Nissan+Quest+replacing+tag+lights ..
3/10/2022 11:29:28 PM • Nissan Quest... • Answered on Mar 10, 2022 • 40 views
0helpful
2answers

Vehicle performance after EGR delete 1996 Nissan Quest Mercury Villager

no ecm wont adjust it will be setting off more codes and stalling the egr can also cause a no start problem need to fix and hook the egr correctly
8/25/2021 6:16:19 AM • Nissan Quest... • Answered on Aug 25, 2021 • 69 views
0helpful
2answers

Why does my Nissan Quest surge and won’t go over 40 mph

not much info hear But 1 of the first things to check on any car not running right is the Air Filter. because your car has to breath to run right. if you hold the filter up to the sun you should be able to see the light through filter. it is almost impossible to clean most filters. if any questions just replace air filter! same with fuel filter. you did not say if your check engine light is on? if it is most any auto parts will put a scanner on your car for Free and print out the codes if you ask. 1976 or newer. good luck
10/9/2019 9:52:32 PM • Nissan Quest... • Answered on Oct 09, 2019 • 222 views
0helpful
2answers

P0406 egr flow sensor A circuit high input

The EGR valve might be build up with a lot of carbon I would clean it first if the code comes back then I will replace it
5/25/2019 7:32:58 PM • Nissan Quest... • Answered on May 25, 2019 • 403 views
0helpful
2answers

I have U1000 CODE ON MY SCAN TOOL,07 NISSAN QUEST SL ,WHEN ATTEMPTING TO DRIVE NO POWER AT ALL

This means 1 of the modules is not communicating with computer. Try cleaning body ground wires/connectors and wire connectors by the ECM. (computer)
5/17/2019 11:26:41 PM • Nissan Quest... • Answered on May 17, 2019 • 992 views
0helpful
1answer

Radio don't work sometimes on my 2008 Nissan quest

Check electrical connections to radio. Also if the speakers wires ground out. it will not play
3/7/2019 12:26:06 AM • Nissan Quest... • Answered on Mar 07, 2019 • 1,024 views
0helpful
1answer

Where is the ecm located on a 93 nissan quest gxe minivan

if it is like my Quest 1999 model it is behind the glovebox. need to open glovebox and carefully move stop tabs a little to go around frame and will drop glovebox down. the box behind this is the ecm.
1/29/2019 7:45:41 PM • Nissan Quest... • Answered on Jan 29, 2019 • 268 views
0helpful
1answer

1993 nissan quest just replaced fuel injectors ran great for 20 minutes then started running rough smoking backfiring and is burning gas like crazy. Gas fumes are terrible

I think you did not put the right injectors look if the new injectors has the same part number, if is not the same you will dump too much fuel into the engine .
10/23/2018 4:56:15 AM • Nissan Quest... • Answered on Oct 23, 2018 • 52 views
0helpful
1answer

2007 Nissan Quest van manual

First, I'm not a Nissan Mechanic.* Contact your Dealer for service*** The following is for information only **** If you post a specific problem on the car then fixya may be able to direct you to the specific solution.* Manual; http://www.vadennissanservicecontracts.com/owners-manual/nissan/2007-Nissan-Quest.pdfAloha, ukeboy57
7/12/2018 10:09:54 PM • Nissan Quest... • Answered on Jul 12, 2018 • 121 views
Not finding what you are looking for?
2005 Nissan Quest 3.5 Logo

36 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Nissan Quest
2004 Nissan Quest

436 Questions

1999 Nissan Quest
1999 Nissan Quest

322 Questions

2000 Nissan Quest
2000 Nissan Quest

285 Questions

1995 Nissan Quest
1995 Nissan Quest

217 Questions

1997 Nissan Quest
1997 Nissan Quest

205 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...