20 Most Recent 2009 Dodge Avenger Questions & Answers


The person you have checking your vehicle is a parts replacer. Not a mechanic. He's just hoping to hit it right, eventually. Have someone check the sensors at the rotors my friend. Most likely one is out of position and not picking up the proper message for the computer. Yes, once the light is out, from all the other work he's done, it will come back on each time. That's just the nature of the beast. If it is just a sensor at the rotor out of adjustment, the light wont come back on.

2009 Dodge... | Answered on Jun 15, 2017


Do the power windows an locks work ? Check for broken wires inside door rubber . This boot has wires inside an after years of opening door wires break . Is there door ajar symbol lit on the instrument cluster ?

2009 Dodge... | Answered on Sep 01, 2016


takee it to a AC tech

2009 Dodge... | Answered on Dec 04, 2015


you dont repairr them you replace them

2009 Dodge... | Answered on Dec 04, 2015


lift the hood on the front of the rad you will find a plastic black cover , its held on with push pin fasteners to remove them you need to lift the center bit , use a small screw driver to do this the fastener now lift out there should be 6 to 8 of them now this cover will come off, you will find 4 10mm bolts that hold the light assemble in place take them out gentley remove said light , the bulb comes out with a 1/4 turn of the light socket DO NOT TOUCH THE GLASS PART OF THE BULB WITH YOUR BARE HANDS AS THE OIL ON YOUR SKIN WILL CAUSE A HOT SPOT AND BURN THE BULB OUT WEAR GLOVES IF YOU NEED TO TOUCH THE BULB! repete process to install

2009 Dodge... | Answered on Nov 28, 2015


Did you getting gas?Could be crankshaft sensor.

2009 Dodge... | Answered on Aug 23, 2015


You need a code scanner/reset tool to turn off the engine light

2009 Dodge... | Answered on Jun 21, 2015


A quick lube place unhooks the lines to the tranny and runs a vacuum pump to draw out the old fluid, then the new fluid is but in and the fittings put back. If there is no drain plug then you have to drop the pan.

2009 Dodge... | Answered on Mar 19, 2015


proper routing? belt tensioner needs to be moved

2009 Dodge... | Answered on Mar 17, 2015


There is none,cover needs to be removed and resealed

2009 Dodge... | Answered on Mar 17, 2015


Some automatic transmissions have a drain plug on the pan, most don't. The fuid on the drain pan is drained as the pan comes off the transmission. Most torque converters don't have a drain plug, few do. Generaly, most of the fluid remains in the torque converter, many pints of fluid. The best change in this case is to do a transfusion of the fluid at a shop. Some people disconnect a fluid hose to coolant in the radiator and pour the fluid in the filler hole quickly with the engine in idle as the fluid drains out the disconnected hose. I'd rather take it to a shop for a trans fusion

2009 Dodge... | Answered on Mar 15, 2015

Not finding what you are looking for?
2009 Dodge Avenger Logo

176 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Avenger Dodge

  • Avenger Dodge

Most Popular Question

code p2441 p2445 coming up 2009 dodge

  • Cars & Trucks
Loading...