Senior Field Tech with a major company with 45 years experience.
Terry Dovre posted an answer for this Vizio Televison & Video:
"Hell0, have you tried using a different HDMI input and HDMI cable? If you do and still..."
Terry Dovre posted an answer for this Samsung Televison & Video:
"Hello, there's a couple of things to try. First unplug the tv, then unplug the "one..."
Terry Dovre posted an answer for this Hitachi Televison & Video:
"Hello, more than likely the set has bad back lights, a very common issue with these..."
Terry Dovre posted an answer for this Samsung Televison & Video:
"Hello, you DO NOT remove them, they are made on to the screen. The set more than likely..."
Terry Dovre posted an answer for this Samsung Televison & Video:
"Not possible, they are made on to the screen, they carry the info throughout the screen......"
Terry Dovre posted an answer for this Sharp Televison & Video:
"Hello, a very common issue with these sets, the back lights in the screen have gone..."
Terry Dovre posted an answer for this Insignia Televison & Video:
"Hello, the set has bad back lights , a very common issue with these sets. Thanks Techman..."
Terry Dovre posted an answer for this Samsung Televison & Video:
"Hello, The T-Con is built into the main board, and without the complete model and run..."
Terry Dovre posted an answer for this Samsung Televison & Video:
"Hello, unplug the main board from the power supply and plug the set back in, the back..."
Terry Dovre posted an answer for this Mitsubishi Televison & Video:
"Hello, one of the fans are bad or just clogged up, but only vacuum them off, NEVER blow..."
Terry Dovre posted an answer for this RCA Televison & Video:
"Is it a projection set without a model number I can only make a guess. If your using..."
Terry Dovre posted an answer for this Televison & Video:
"Hello, the noise was an LED exploding in the screen taking out the back lights..."
Terry Dovre posted an answer for this Sharp Televison & Video:
"Hello, it's one of two things, the main board has gone bad (part # DUNTKD934FM04-V2), or..."
Terry Dovre posted an answer for this Samsung Televison & Video:
"Hello, that set uses 2 LED strips that are no longer available and the 55" strips are..."
Terry Dovre posted an answer for this LG Televison & Video:
"Hello, there aren't back lights in a plasma set. It may have a bad y-sustain board part #..."
Terry Dovre posted an answer for this LG Televison & Video:
"Hello, either the power supply is failing to power up the LED's or the LED strips in the..."
Terry Dovre posted an answer for this LG 50PG20 50 in. Plasma HDTV:
"Hello, there are several things that it could be, but if the set comes on with a picture..."
Terry Dovre posted an answer for this LG Televison & Video:
"Hello, the power supply part # is EAY62810701"
Terry Dovre posted an answer for this LG 42LC2D 42 in. LCD HDTV:
"Hello, if the model number is correct it's not a projection tv, but an LCD tv. If that's..."
Terry Dovre posted an answer for this LG Televison & Video:
"Hello, those sets are notorious for the LED strips failing. I have replaced dozens of..."
Terry Dovre posted an answer for this LG 26LX2R 26 in. HD-Ready LCD TV:
"Hello, the power supply (part # 6871TPT303B) is the issue, usually capacitors that are..."
Terry Dovre posted an answer for this LG 50PX5D 50 in. Plasma HDTV:
"Hello that's a 2010 model set. It sounds like the y sustain board is failing (part #..."
Terry Dovre posted an answer for this LG Televison & Video:
"Hello, a screen shot of the issue is needed....thanks"
Terry Dovre posted an answer for this Sony Grand Wega Kds-60a2000 60-inch Sxrd 1080p Rear Projection Hdtv:
"Hello, How many times does the red light blink and repeat? Are you sure all the covers and..."
Terry Dovre posted an answer for this Hitachi Televison & Video:
"Hello, the convergence i.c.'s have failed. you will need to change both i.c.'s and check..."
Terry Dovre posted an answer for this Hitachi Televison & Video:
"Hello, the last I checked and that was several years ago, the screens were no longer..."
Terry Dovre posted an answer for this Mitsubishi Televison & Video:
"Hello, did you touch the face of the lamp? If you did, you will need to clean it off to..."
Terry Dovre posted an answer for this JVC HD-70FH96 70" Rear Projection HDTV:
"Hello, remove the lamp and make sure it didn't go bad. If it's ok the a color wheel or fan..."
Terry Dovre posted an answer for this Sony Televison & Video:
"Hello, this set is a CRT projection set, not a DLP that uses a lamp. If you have no..."
Terry Dovre posted an answer for this Mitsubishi Televison & Video:
"Hello, count the blinking light pattern. It may blink 2 to 9 times, pause and repeat the..."