Luong Trong Truong posted an answer for this Singer Sewing Machines:
"Your reverse button is stuck. Try this before going to a professional. Unplug your power..."
Luong Trong Truong posted an answer for this Singer Sewing Machines:
"Your reverse button is stuck. Try this before going to a professional. Unplug your power..."
Luong Trong Truong posted an answer for this Brother Sewing Machines:
"1) Unplug the electrical cord. 2) Loosen the bolt holding the motor to the frame. It..."
Luong Trong Truong posted an answer for this Sewing Machines:
"The belt tension may be too tight. adjust the tension from the belt to motor. It should..."
Luong Trong Truong posted an answer for this Sewing Machines:
"Best way to go about this issue is to bring the bobbin case to the repair shop. They r..."
Luong Trong Truong posted an answer for this Singer Sewing Machines:
"In order to solve your problem, you may have to take the machine apart. The gears may..."
Luong Trong Truong posted an answer for this Sewing Machines:
"What is the model? Generally, most sewing machine have oil ports. Place a couple of..."
Luong Trong Truong posted an answer for this Singer Inspiration 4210 Mechanical Sewing Machine:
"The thread timing on your machine is off. It needs to be adjusted by a professional."
Luong Trong Truong posted an answer for this Janome Sewist 525S Mechanical Sewing Machine:
"The bobbin case does have a tension screw. There may be lint at the bobbin case tension..."
Luong Trong Truong posted an answer for this Sewing Machines:
"You need to open up the machine and place a few drops of oil around the zigzag mechanism. ..."
Luong Trong Truong posted an answer for this Sewing Machines:
"Air may be pushing through. Doers not mean the appropriate air pressure is there. There..."
Luong Trong Truong posted an answer for this Sewing Machines:
"There r several resons: 1) Metal face plate where the thread goes up is damaged. Need to..."
Luong Trong Truong posted an answer for this Juki DDL-8700:
"Your safety switch may be defective. The constant over heating in the original wire may..."
Luong Trong Truong posted an answer for this Consew 205RB-1:
"Brand and model?"
Luong Trong Truong posted an answer for this Sewing Machines:
"Brand and model?"
Luong Trong Truong posted an answer for this Elna Sewing Machines:
"Open the top and bottom cover then place a couple of drops of sewing machine oil at every..."
Luong Trong Truong posted an answer for this Brother PE770 Computerized Sewing Machine:
"When your needle broke the first time, it may have gouge or cause sharp edges to appear on..."
Luong Trong Truong posted an answer for this Brother PS-1250 Pacesetter:
"brand and model?"
Luong Trong Truong posted an answer for this Sewing Machines:
"Your reverse mechanism may be frozen. You need to place a couple drops of sewing machine..."
Luong Trong Truong posted an answer for this Sewing Machines:
"Brand and model?"
Luong Trong Truong posted an answer for this Sewing Machines:
"You will need to adjust your upper tension to 4-5. If the problem still persist then the..."
Luong Trong Truong posted an answer for this Sewing Machines:
"1 of 2 things. Your needle may be facing the incorrect direction or your timing is off."
Luong Trong Truong posted an answer for this Sewing Machines:
"You may have a loose belt or burnt motor that needs replacing."
Luong Trong Truong posted an answer for this Sewing Machines:
"Have not seen a sewing machine able to do that. Unless it has a computer chip built in, I..."
Luong Trong Truong posted an answer for this Sewing Machines:
"The spring may need a little oil. Carefully pry the bobbin."
Luong Trong Truong posted an answer for this Singer 4411 - Heavy Duty Model Sewing Machine:
"Did you place the bobbin back into the bobbin case? Need to clarify what you mean when it..."
Luong Trong Truong posted an answer for this Sewing Machines:
"It may be frozen. Remove the bobbin case, thread, and needle. Remove the top cover. ..."
Luong Trong Truong posted an answer for this Sewing Machines:
"Your reverse mechanism may have frozen. Place a couple drops of sewing machine oil into..."
Luong Trong Truong posted an answer for this Janome Memory Craft 10000:
"Replace the needle then try again. If this does not work then your machine's timing is..."
Luong Trong Truong posted an answer for this Sewing Machines:
"Place a couple of drops of sewing machine or penetrating oil into the affected joints of..."
Luong Trong Truong posted an answer for this Sewing Machines:
"The gear can be replaced. There should be a couple of screws securing the gear. You may..."