Viper Vehicle Parts & Accessories - Recent Questions, Troubleshooting & Support

You gonna hate me for this.....
Get a 2020 Corvette. 250+mph ain't no joke.

Sorry dude I just had to.


Viper Vehicle... | Answered on Oct 14, 2019

Please ask a trusted relative or friend to help you type the words into com and the search will show several free manuals.

Viper Vehicle... | Answered on Oct 01, 2019

There is a very small connection pin under each button.
If they don't make contact information will not work on remote. You can check this by very carefully opening the remote. Don't open all the way just enough to see if the buttons are lined up. Take a flashlight and magnifying glass and look to see if they are all lined up when you push the remote. If they are not you will be able to see no contact. Take a toothpick and very gently Aline the pins.
If you touch them to hard they will break and your remote will be toast.

Viper Vehicle... | Answered on Sep 30, 2019

Check the car battery & remote battery

Viper Vehicle... | Answered on Sep 29, 2019

From the Manual
a. Find the "frozen" segment according to the display.
b. Press firmly down on the "frozen" segment until it breaks free and the loose fit is restored. Once the "frozen" segments are loosened, the error message should be gone and the board will continue to operate normally.

Viper Vehicle... | Answered on Sep 25, 2019

press and hold the ( P ) button until one long beep is heard, you now have 5sec to push the lock button to turn on or off the vibrate, wait another 5sec and it will automaticaly exit programming

Directed... | Answered on Sep 23, 2019

Under your steering wheel there is a block box with 2 fuses that attach to steering column.plug out that two fuses,15amp blue and .10amps red.

Viper Vehicle... | Answered on Sep 18, 2019

Press and hold F button for 8 sec, will beep once, Main Menu is displayed. Release F Setup Remote is displayed. Press Aux to change options, press F to choose option, navigate to Button beep and select off.

Viper Vehicle... | Answered on Sep 15, 2019

should be a open slot on the end of the ring end

Viper Vehicle... | Answered on Aug 16, 2019

These must be satisfied first -
Driver Door Trigger must be open
Siren must be hooked up
Valet button must be inserted appropriately

Press and hold the valet button until you hear one chirp and let go.
Press the lock button.
Turn the ignition on to leave programming.

I see this is from 2011 so I hope you figured it out!

1002 Car Alarm... | Answered on Jul 11, 2019

NO! You should not have to. Have the alarm remote in one hand because when you hook the battery cables back up the alarm is going to go off. Push the button to shut it off and that shoukd be it. You should not have to reprogram anything.

Viper Vehicle... | Answered on Jul 10, 2019

Does the remote diarm the alarm? Do you hear the " chirp chirp" when you press the unlock button on the remote? If not, then the remote is defective or needs to be reprogrammed to the alarm. If you do hear the " chirp chirp" but, the doors do not unlock, then the issue is with either the wiring from the alarm or the vehicles power locks. Did it work before? Do you have power door locks?

Remote Start... | Answered on Jul 03, 2019

the remote did not receive a signal back from the module or the module did not receive the remote signal
Check the battery connections there is a connector plug soldered on the board real close to where the battery is, and if it is hit by the battery hard enough it will cause those solder connections to disconnect and you will get the beeps and or other malfunctions

5701 VIPER 5701... | Answered on May 27, 2019

Google it for owners manual!!

Viper Vehicle... | Answered on Apr 29, 2019

Not finding what you are looking for?
Viper Logo

1,094 questions posted

Ask a Question

Usually answered in minutes!

Top Viper Vehicle Parts & Accessories Experts


Level 3 Expert

434 Answers


Level 1 Expert

30 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Viper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides