Savin Office Equipment & Supplies - Page 4 - Recent Questions, Troubleshooting & Support

What do error codes 91 and 92 in the error log mean? 91: The job was reset by the device. 92: The job was manually reset by a user.

Check out utube

If it jams on the way out every copy the the exit switch is out of position or broken, if not then sep pad p/n B0392711. -Carl

Empty it.

Bad networks settings in User Tools

Dirty fuser thermistors

Bad toner pump

Waste toner auger is clogged and won't turn. Also, the sensor on it could be dirty. Remove the assembly and clean it. It is behind the back panel - it is a small black assembly with a white hose attached to it.

Replace the stapler

Dirty fuser thermistor.

Go into user tools and turn it off.

You must go into service mode. It is in the SP5XXX area.

Print out configuration page.

That error code is a dirty fuser thermistor. Clean it and go into service mode then turn off main power switch. That is all that is required. What is out of alignment?

80,000 pages

Using the WIM you can access the Address Book and add or delete these.