Kenmore Sewing Machines - Page 9 - Recent Questions, Troubleshooting & Support

you aren't qualified to make parts out of missing parts, or to fix it. take it to a repairman - pay the money - and avoid the stress and aggravation.

increase needle thread tension

Apparently for sale cheaply on eBay.com https://www.ebay.com/itm/KENMORE-13050-158-13150-158-13160-13170-13180-MANUAL-on-CD-disk-/160781150733 KENMORE 13050 158 13150 158 13160 13170 13180 MANUAL on CD disk eBay

With make and mode l# go to, sears parts direct.com. This should help you. Good Luck Friend.

Needle in correct? Be sure your bobbin is not in upside down and turning the wrong way. Possibly the hook that the bobbicase fits in/on has been hit by a needle and caused a burr that is catching the thread as it comes around. The burr would have to be polished off or hook replaced. The machine could be slightly out of time also.

You may find the serial number stamped in the metal under the machine.

Probably the best thing is to take it for service. You can try searching for a manual: Make Model manual

Find your complete model number, and type that into the web-site: "searspartsdirect" and you will be presented a picture with schematics, and also the ability to obtain a manual. God bless your efforts.

Most likely it is seizing due to old oil that has dried. Avoid trying to use it until you get it serviced or the motor may be damaged. Your sewing machine needs periodic oiling and cleaning in order to run smoothly, like your car.

Not sure what you are asking. Thread guides generally are stationary and do not move.

If this is an older metal mechanical machine, it may be seized due to lack of oil. Wheel on right side that controls the needle up and down is very tight...