Jeanie Rub Health & Beauty - Answered Questions & Fixed Issues

no fixya site fixes nothing

Hi ring core product they might b able to help ,,877-249-1251.....cheers

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.1-800-338-7014

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.1-800-338-7014

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.1-800-338-7014

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

110 volts

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.

1-800-338-7014Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service, please call 1-800-338-7014.

It kinda depends, You might be able to bring it to a store where they will repair it for a costly charge. If you are okay with working with your hands however, you can dismantle it yourself and just repair it yourself. How you would do that is, to take it apart screw by screw until you get the power supply out in the open and just wrap the wires that are torn with electrical tape and then just close it back up. MAKE SURE YOU UNPLUG THE UNIT IF WORKING ON IT

Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is a 90-day warranty on any service that is performed by Core Products International.

Where to send itCore Products International, Inc.RETURNS DEPARTMENT 1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

There is an adhesive label on top of the unit. Use a single edge razor blade to lift the label from either side (left or right) until the two recessed hex nuts are exposed. You will need a 9mm socket to remove these hex nuts. Be careful as there is a 6mm jam nut at the base of the threaded rod that holds the rod against the top of the motor housing.Once you have removed the two hex nuts, be sure to save the tiny washers in a safe place. Once the handle is off, you might want to mark the black wire that is conected to the white wire to ensure that reassembly enables the proper connections.Once the handle is off, you can take a small pair of needle nose vice grips and squeeze the cord retainer to facilitate the removal of the handle completely after removing the wire nuts.Be sure all wire ends are marked to your approval.The jam nut on the threaded rod needs to be loosened in order to lift the motor housing off of the motor. Use only a drop or two of penetrating oil on the threaded rod. Attach the two hex nnts removed earlier at the top of the threaded rod to create a jam nut at the top, by tightening them together. Holding these with a wrench, use a 6mm open end wrench or tiny vice grips to loosen the jam nut. Be sure the 6mm jam nut freely moves to the top on each side.Remove all hex nuts and the motor housing can be lifted off.Be very careful not to let the motor tirn over or you may lose the springs.

Jeanie Rub Service Information Out-of-Warranty Service

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

Core Products International, Inc.RETURNS DEPARTMENT RA#XXXXX1505 Parker Ave, PO Box 627Chetek, WI 54728

If you have any questions regarding our service information please call 800-338-7014.

Jeanie Rub Service Information Jeanie Rub Warranty Information Core Products provides a full one-year warranty on all defects in material and workmanship. Any misuse, unauthorized repairs, or product abuses are excluded.

Defective products reported within one year of date of purchase will be replaced or repaired. Call the Customer Service department at Core Products at 800-338-7014 for a return authorization number and to arrange shipping. Out-of-Warranty Service

Core Products will repair most Jeanie Rub Massagers after the warranty has expired. Some of the very early models can not be repaired but can be returned for a $50.00 credit towards a new unit.

It is difficult to determine the extent of the repair until the unit is inspected however, we guarantee the service call will not exceed $89.00 plus shipping.

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Complete Service Package - $89.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad - Replace motor

Cord Replacement - $25.00 + $13.00 Shipping- Replace worn cord

There is an adhesive label on the top of the motor.There are two very small hex nuts that hold the handle tight against the motor assembly. You can take a sharp single edge razor blade and lift the adhesive label from the motor on either side, the left or the right just far enough to expose the hex nuts. Use a small 9mm socket to loosen the hex nuts enough to slide the cover out. Retighten the hex nuts. Use a strong glue like Gorilla glue to reattach the label.I sewed some "1-inch" wide elestic straps on each end to the cover to prevent it from sliding....that was over ten years ago and it works great.

There is an adhesive label on the top of the motor.There are two very small hex nuts that hold the handle tight against the motor assembly. You can take a sharp single edge razor blade and lift the adhesive label from the motor on either side, the left or the right just far enough to expose the hex nuts. Use a small 9mm socket to loosen the hex nuts enough to slide the cover out. Retighten the hex nuts. Use a strong glue like Gorilla glue to reattach the label.I sewed some "1-inch" wide elestic straps on each end to the cover to prevent it from sliding....that was over ten years ago and it works great.

Basic Service Package - $49.00 + $13.00 Shipping- Cleaning- Replace worn parts & pad

Where to send itAfter you have gotten an RA number from customer service, please send the unit to:

Core Products International, Inc.RETURNS DEPARTMENT RA#XXXXX1505 Parker Ave, PO Box 627Chetek, WI 547281-800-338-7014

Try rotating the pad about half a turn.

The chances are that some parts are worn, after all this time, or the motor is going bad, but you might get lucky. As far as taking the unit apart, you'll be hard pressed to find any directions. Best thing to do is just study the machine- everything that went together has a way to come apart, even if it has to be broken, which some things are designed to do, upon disassembly. However, most things can be taken apart with the right tools and patience. Look for screws or hidden fasteners under label plates and covers (some will snap off, as they are pressure fitted). Sometimes special tools are required or the fastener is impossible to take off without breaking something.
Sometimes it's best to get advice from someone who does this type of thing for a living- that is, a small engine repair shop. They could probably look at it and tell you what needs to be done, or at least what you need to do to get into it.
Anyway, good luck, study it well, and hopefully you'll be successful getting it fixed.

Applying heat with your massage will enhance the sensation of themassage, for deeper relaxation.

Yes it is generally accepted as perfectly safe and I know of a 50 year old and a 71 year old that does it. The 71 year old is a retired doctor. Intermittent fasting is safe for many people, but it's not for everyone. Skipping meals may not be the best way to manage your weight if you're 'with/child* or *feeding. If you have kidney stones, gastroesophageal reflux, diabetes or other medical problems, talk with your doctor before starting intermittent fasting.

Intermittent fasting: What are the benefits? - Mayo Clinic

Mayo Clinic https://www.mayoclinic.org > faq-20441303 https://www.google.com/search?q=Is+intermittent+fasting+safe ..

Only in those that are not healthy in the first place or those that are older. Our immune system becomes less effective at fighting infections as we age. This results in older people contracting more infections and they can be more severe.

Sepsis and Aging

Sepsis Alliance https://www.sepsis.org > sepsisand > aging

Systematic analysis of infectious disease outcomes by age ...

National Institutes of Health (NIH) (.gov) https://www.ncbi.nlm.nih.gov > articles > PMC7566589 by JR Glynn · 2020 · Cited by 69 - In a systematic analysis we identified 142 datasets with information on severity of disease by age for 32 different infectious diseases, ... ..