Casio Edifice - Recent Questions, Troubleshooting & Support - Page 3

Peet you need to take it to an expert to fix this problem. The watch is complex. save it.

Thank you for contacting FixYa.
To set the analog time, press the lower left button 6 times. Next, press and hold the upper left button until the digital time starts to blink. This indicates that you are in analog time setting mode.

Analog time adjustment is completed using the lower right button. Every time you press the button, the analog time will advance 20 seconds. If you need to make a big change to the analog time, press and hold the lower right button to make the hands move faster. Once the analog time is set, press the upper left button to exit the analog time setting mode.
Best regards. Jewel

What resolution the video? HD, 3D? Read the module number on the back of the watch. It is a 4digit number near the periphery of the circles. Visit the Casio worldwide site and download the manual for that module. Read the instruction

Some watches can display dual times (two values) usually off by an integer number of hours + 30 minutes, Read the manual to set the digital display time then correct the analog display. Or just use one of the two.

Try pulling out the winder an pressing the stopwatch button to advance the hands around, if not it may need to be reset from inside

click this link to download the manualhttp://support.casio.com/en/manual/manuallist.php?cid=009

what do you mean by watch cover ? do you mean the crystal ?

push in at the same time as you screw clockwise

On most brands, there are pins that form hinges for the links of strap. You need to push them out to remove links. Usually you would find arrows marked from inside of the metal bracelet which show you the direction in which to remove the pins. You can remove it if you have a small watch maker's screwdriver but you have to be careful. or get one of these ..
http://www.amazon.co.uk/Watch-bracelet-link-adjuster-remover/dp/B001ZKIL2S/ref=sr_1_1?ie=UTF8&s=watch&qid=1254695541&sr=8-1

which should help you to remove the link pins safely without scratching.