Toaster Ovens - Page 2 - Answered Questions & Fixed Issues

Unfortunately, it does not look like there is a replacement part available for your Farberware Toaster Oven model #510615. You may want to consider purchasing a new toaster oven.

Breville BOV845. I managed to partially detach the outer shell on the left side only. Found "the" loose spring inside with both ends snapped off & gone. Could see where spring attaches to a hole in the end of the door's left side "arm" but could not see where the other end of the spring would attach to inside the body. Had I seen an obvious location, I would've rebent the ends of the spring & fixed it. Or matched up spring at Hrdwre store & replaced it. Online schematics are blurry & inconclusive. Almost all parts are NLA, obsolete.

The process for removing the unit cover and accessing the start/stop switch can vary depending on the type of equipment you are working with. Here is a general outline of the steps that you can follow:

1. Turn off the power to the equipment: Before you begin, make sure that the equipment is powered off and unplugged to ensure your safety while working.
2. Locate the unit cover: The unit cover is usually located on the top or side of the equipment and is held in place by screws or clips.
3. Remove the screws or clips: Use a screwdriver or pliers to remove the screws or clips that secure the unit cover in place.
4. Lift off the unit cover: Once the screws or clips have been removed, gently lift off the unit cover to expose the interior of the equipment.
5. Locate the start/stop switch: The start/stop switch is typically located near the control panel of the equipment.
6. Inspect the start/stop switch: Look for any visible damage or loose connections on the start/stop switch. Check the wires to make sure they are securely connected.
7. Test the start/stop switch: You can test the start/stop switch by pressing it several times and observing the equipment's response. If the equipment does not respond, the switch may need to be replaced.

It is important to follow the manufacturer's instructions when removing the unit cover and accessing the start/stop switch, as the exact process can vary depending on the equipment. If you are unsure about any steps or feel uncomfortable performing the task, it is best to consult a professional for assistance.

A faulty thermostat or temperature sensor could be the cause of your Oster toaster oven's heating element not turning off when ready. You can try the following steps to fix the problem:

• Check the settings for the temperature control: Check to see that the thermostat is not set too high. The heating element may not turn off even when the desired temperature is reached if it is set too high.
• Get the toaster oven clean: Check to see that the toaster oven is clean and free of obstructions. The heating element may occasionally malfunction due to dirt and debris. You can get oven cleaner, https://amzn.to/3xlDd86 .
• Check the temperature: The thermostat or temperature sensor may be defective if the problem persists. To fix the problem, you might need to buy a new thermostat or temperature sensor.
• Contact Oster's support team: You can get assistance from Oster customer service if the problem persists after attempting the steps listed above. They might be able to offer you a solution or point you in the direction of a repair company.

It sounds like your KitchenAid toaster oven may be experiencing a malfunction. The blinking blue light could indicate an error code or issue with the oven's control panel. Without more information about the specific model and the exact behavior of the blinking blue light, it is difficult to provide a specific solution. However, you may try unplugging the oven for a few minutes and then plugging it back in to see if that resolves the issue. If the problem persists, it would be best to contact KitchenAid customer service for further assistance or consult the oven's user manual for troubleshooting tips.

I took unit apart and tightened the spring

It sounds like there may be an issue with the function control knob on your KitchenAid toaster oven. If the knob will not turn and no power light comes on, it could indicate a problem with the knob itself, or a more serious issue with the oven's internal electrical components. Here are a few things you can try to troubleshoot the issue:

1. Check the knob for any physical damage or debris that may be preventing it from turning. Clean the knob and the surrounding area if necessary.
2. Check the electrical connections for the knob. Make sure that the connections are securely in place and that there is no damage or corrosion.
3. Check the power outlet. Make sure that the outlet is working properly and that there is no issue with the circuit breaker or fuse.
4. If the above steps don't solve the problem, it could indicate a more serious issue with the oven's internal electrical components. It's recommended to contact the KitchenAid customer service or a professional technician for further assistance.

It's also important to check the oven's warranty status and the manufacturer's instructions to ensure that the repair or replacement will not void the warranty. Keep in mind that troubleshooting and repairing electrical appliances can be dangerous if you are not familiar with the proper procedures. If you are not comfortable with performing the troubleshooting yourself, it's best to contact a professional technician for assistance.

Here ya go..... https://www.gooditemcoach.online/product/Function-Selector-Knob-Part-For-Farberware-Convection-Toaster-Oven-Model-103738_e6gomprppmmqruq.html Best to you.

Only this part it it looks like plastic, but not if it is enamel.Includes an oven-top nonstick grill and griddle with dome lid can be used for steaming or keeping food warmhttps://www.google.com/search?q=Elite+Gourmet+ERO2008S+1500+watts+oven+contain+PTFE....

Wish I could help, I share your story. On mine, the door got stuck. In trying to free it, it well, you know...

According to sources, breville toaster oven E05 LCD error is non-resettable issue. You should immediately turn off your toaster oven and remove the power plug. After doing so, call breville customer care. Hope it helps!

Is the fan not running? Or do you mean other 'signal' sounds? The oven is discontinued, but Cuisinart carry some spares but nothing mechanical. You would have to contact them. https://www.google.com/search?q=cuisinart+steam+convection+oven+plus+parts ..

check with manufacturer or search online

Question edited for clarity, full make model (what it is). Check out the parts suppliers https://www.google.com/search?q=black+and+decker+T01313SBD+parts ..

That number looks like a serial number as opposed to a model number. Black and Decker start with 'TO' for Toaster Oven. https://www.google.com/search?q=black+and+decker+6+slice+convection+toaster+oven+manual ..

Probable heating element or control failure

I found the answer (see below) posted on another web site. I followed the instructions and replaced the spring. I found, as the original poster had, that the new spring works better than the original and is much more sturdy. To the original instructions, I would add the following: 1) There are about 20 screws so have patience removing and replacing the screws. 2) Step 3, "Slide off the rear panel" requires further clarification as the panel will not slide off even with all screws removed. I had to turn the oven over, with the top of the oven sitting on the work table. I then used a screw driver to lift the two tabs that hold the back panel to the bottom panel. With the tabs lifted, the back panel will rotate away from the oven along the edge where back panel slides into the top panel. The back panel can then be slid out. I have included three photos that show this step. 3) Step 7, "Re-attach feet": Be sure to use the guides on the bottom of the oven to slide the foot assembly onto the oven. I had unsuccessfully tried to screw the feet onto the oven without using the guides. Oringinal instructions for replacing the broken spring: Just repaired this yesterday. Got a spring from Lowes (Hillman Part # 543028 for about $4), it's larger than the original but seems much sturdier, original is really thin metal. Fit the space provided without problem. Oddly, end result was a more 'giving' spring action, prefer it to original, which loved to snap shut unless door was 100% opened (ie fully 90 degree open). This is for BOV800XL: 1. Remove all rear screws 2. Remove feet entirely 3. Slide off rear panel 4. I was not able to remove top housing - but I was able to gently pry sides open just enough to thread the new spring with a little ingenuity and effort. Watch out for sharp metal edges everywhere. 5. Slide back in (remember that top edge goes under the top edge/lip) 6. Put all screws back in 7. Re-attach feet Good luck!

There are no repair parts for this. If under warranty return it, otherwise dispose of it

This is the BCOBR020 model Janice. The 030 is not available online. You could write to Chef Puck Direct. https://www.manualslib.com/manual/796944/Wolfgang-Puck-Convection-Toaster-Oven.html#manual regards Chef Andrew (retired)

Category moved from Laundry Dryers to Toaster Ovens. Question edited for typo. Amazon or Walmart. Buy based on the size. Replacement Toaster Oven Tray - Huge Selection & Great Prices Ad·https://www.amazon.ca/ Buy Replacement Toaster Oven Tray & more. Qualified Orders Over $35 Ship Free. "); background-size: 13px 15px; background-repeat: repeat-x; font-size: 0px; line-height: 0;">") 0px 0px / 13px 15px repeat-x; line-height: 0;"> Rating for amazon.ca: 4.6 - 48 reviews ‎Arts, Crafts & Sewing · ‎Home D?cor · ‎Deals in Home & Kitchen · ‎Storage & Organization Replacement Tray Toaster Oven Ad·https://www.walmart.com/ Free 2-day Shipping On Millions of Items. No Membership Fee. Shop Now! ‎Walmart+ · ‎Buy Now, Pay Later Or here https://www.fix.com/parts/small-appliance/cooking/toaster-oven/ ..