Crafts & Hobbies - Page 6 - Answered Questions & Fixed Issues
How do you type a o with a line through it in cricut
You need to supply some more Specifics in your question, i.e. What kind of device are you using?
A Stereo component?; A Circuit Board:? An Appliance, Etc.?? A computer's Input Program {and if so, exactly which Brand, Type of, MODEL NUMBER/NAME and date-of-manufacture of Its Computer are you using? Which 'Word Processor' {Its Name & Its Version # } and Which 'Editor' does the Computer use??
Juki tl2200 qvp mini problem with needle
Lower the presser foot.
Move the needle bar up to the highest position. Unscrew the needle clamp screw, Be sure to almost completely unscrew it.
Hold the needle with its long groove faced to the
left, insert the needle into the needle bar until it will go no further. Then, tighten the needle clamp screw.
Jet bench thickneser
Might have overheated turn off & let it cool down, Are you trying to take too big of a cut?
5/27/2019 7:35:10 AM •
Jet Crafts &...
•
Answered
on May 27, 2019
•
229 views
CW 80 -Direction button doesn't work
Recent Lionel transformers are notorious for their issues. Put an old fashioned reverse switch into the circuit, an old Lionel 88 will do the wire to terminal 1 of the lockon or the wire tothe center rail needs to be cut and attached to the 2 terminals of the 88 reverse switch. Note this is ancient technology from the 30s to 50s
9/12/2019 1:13:36 PM •
Lionel Cw 80...
•
Answered
on Sep 12, 2019
•
1,099 views
How can I remove red crayon that went through the dryer?
ok get a credit card or other card of the same style, and scrape off the majority of the crayon as much as possible. then get a hair dryer and melt the crayon with the hair dryer, then u can get it up easier with ajax or comet and a damp sponge. repeat if needed.
Not finding what you are looking for?