Crafts & Hobbies - Page 8 - Answered Questions & Fixed Issues

You should be able to change the font size in the software program.

Heat the glue up an remove tube glue from injecter then take a paper clip an push pencil out

Check the instruction manual.

No more than 1/2 teaspoon at a time. Less is more.

Take it to a small appliance repair store.

Contact the manufacturer.

Yes, you will damage the machine if you keep using it. Contact Pfaff. They have a customer service # on their website. Call them and see who is authorized to fix it, or call the shop where you bought it. Don't use it unless you are ready to get rid of it.

If your instructions don't tell you how, check the Cricut website.

Check the Cricut website for troubleshooting. You are not the first person with that problem.

Try WD 40.

Take it back to whoever just cleaned and oiled it, and tell them the issue.

Contact the manufacturer through the Customer Service number.

Call Customer Service.

Remeasure and recut the pieces. You somehow mismeasured one or more of the colors. Don't cut more than one color at a time, and fit it to the rest of the design before you cut the next piece.

Attach the handle material about 4 inches before where you want the handle. When you get to that point, start covering the handle and working it separately from the rest of the basket. When you get to the edge, rejoin the handle to the basket, and continue to cover the handle material for an additional 4 inches, then cut off the excess. Repeat on the other side of the basket.

Check the Lionel website.

No. It isn't designed to do that.

Every day that you can.

Contact Lionel. It may be defective.

Contact the manufacturer. There should be a customer service toll-free number in your instructions.