Questions & Answers for: Behringer can t turn on power

turn on the power and red light indicator turns on but cooling fans (2 of them) don't turn on, then slowly turns off with no power. Someone told me to check the fuse, it's possible the power supply or

Behringer EP2500 trips immediately when turned on when amp is turned on, makes sound (red lights come on, blink and fade) and amp trips its breaker switch immediately after turned on. Power supply ...

NO POWER PANTEM You will need to turn on phantom power on the mixer. Contact the mixer manufacturer to determine how to turn on phantom power on your mixer.

...turn on and the fuse appears good. I turned it on and it immediately turned off ,nothing smells burnt. any ideas on what it could be This is likely a power supply failure, possibly brought on by a ...

...power source and turn them on AFTER connecting them. Once powered on you can control the signal going to the mixer with the Main Mix fader. Turn mixer on Ensure Main Mix level is at zero Connect from ...

...epq2000 power amp, limit lights stays on and no sound. when i turn on my power amp it clips and limit lights won't turn off. have the same problem... no solution found for mine.. and

...power amp epq2000 limit lights is staying on when i turn on the power amp the limit lights stays on and no sound comes out of it. i have the same problem... no solution found for mine...and

...Hello, Output section unfortunately went out, this is why it does not turn on as the power supply is a switch mode type and detects some issue in the amp module and this is why it refuses to turn

...corner. You need to plug in a good power cord to a good electrical outlet. There are two switches, one is for phantom the other is power, turn the power on, it should light up. If not check your

...add any effect to my voice. The QX 1204 USB is supposed to have FX effects. Where am i wrong? Did you turn on the phantom power? Condenser mics need phantom power(unless the have their own