Questions & Answers for: Connex tune in radio

...radio & is factory tuned to 29 MHz. If you are using it on CB the receiver should be retuned to 27.205 Mhz by a competent tech. Most dealers who modify & peak these radios never tune the

tune up is cut R249 and R246 this will give u good clear and load modulation Many of the so-called radio techs are 'hacks' who know little about electronics & lack the proper test equipment to perform

...tune done to the radio the stock microphone is no longer any good to use and no longer an option!! The radio tech. should have explained this to you!! You will now have to use a very good quality ...

can"t transmit I believe that if the radio is not tuned to the antennae it can take out the transmit crystals and the radio will be inoperative. You will have to take it to a shop that works on CB ...

...Tune-up $50 you should get 70 watts older units 90 watts newer unitsAs far as the knobs goBand D with channel 19 selected this is 27.185 citizen band if you radio has had the channel expansion done ...

Connex 4600 Turbo receive and transmit problem....my connex when on will not transmit or receive, the light does not change when keyed ether... I have a connex cx-4300 hp it's has poor receive I want ...

radio is a galaxy 98vhp peaked and tuned and i talk every where i key on base stations no problem that antenna is a beast you have some issues goin on over there u need to get that tuned i have a flat

...tune connex cb radio Sound is low. Need to tune the sound loader. I just answered that in the link below ...

...SWR meter to tune my antennas right? not really.Many radios come with one built into the meter on the radio. For those with none you will need an external SWR meter. I would recomend a trucker

...tune a radio it will work better. First, if its brand new from the factory you shouldn't have to,all you should have to do is lower the dead key raise the modulation and you are good to go . The ...