...cover that they conect with, when removed all of the timing belts will be exposed as well as crank shaft end. I used a screw driver angled wedged and held in on the teeth of the fly-wheel to lock it ...
...you. Assuming the car has the 1.8 engine, the oil pump is on the front of the motor, behind the timing belt covers. The belts have to come off to change the oil pump. If you are a novice, this is ...
...a rubber plug that covers a hole in the bell housing. Remove the plug and on the flywheel there are timing marks. you have to turn the engine over clock wise untill you see them. There are 3 lines, ...
Question about 1987 Gl 4WD
1987 Subaru GL 4WD - Oil soaked air filter causing car to stutter My 1987 Subaru GL wagon was stuttering heavily and emitting white smoke, strangely on the same part of the same hill. Then I checked ...
...with carby no turbo.Which one is #1 cylinder, and what is the correct top dead centre angle for timing Number one is the forward most piston on the car, when the piston is at tdc, it will have a ...
solution could be a clogged catalytic converter.It really sounds like a timing belt.Remove inspection cover for the timing belt and have someone turn over the motor and see if your camshaft is turning
timing belt broke and valves are bent 1987 ?' is it worth repairing That is a tough repair. The best way to approach this repair is to remove the engine, then remove the timing belt covers and then ...
...timing belt cover plate, if equipped. Remove the timing belt cover bolts on the left, right, and center covers. Remove the timing belt covers. Remove the rubber cover seal. Clean all mating surfaces. ...
remove timing cover xtrail 2003 ,2.5 ltr nissan removing timing cover nissan 2.5 x trail
Usually answered in minutes!
97 Questions
60 Questions
48 Questions
48 Questions
40 Questions