Questions & Answers for: soap coming pressure washer

...pressure the soap needs to be injected through the intake of the pump. enjoy just check the machine for soap with the high pressure hose disconnected first, if soap comes through then the problem is ...

...This is a very low pressure setting and is used to "apply" the soap only. You cannot despense soap in the hight pressure mode. and be sure that the soap pickup tube is immersed in soap liquid ...

...does not let the soap come out when you turn the soap control on You have to use the SOAP nozzle (Black Tip) It is a low pressure nozzle. The venturi effect prevents the psiphon under high ...

Soap not coming out I can't seem to get the soap to come out unless I take the wand off. Once I put the wand back on only water comes out. you need to put black tip on cause it wont siphon under ...

...soap only works with low pressure tip installed, are you using correct tip? second issue is on bottom of soap tanks some have a small valve , is it open? is the tube blocked with dry soap or ...

...coming out of the soap suction hose there should be a ball check valve in the soap suction hose lets soap in keep water out poke a paper clip in the hole a few times soap will build up there and make ...

...pressure washer In order for the soap to come out you need to use the pressure washer at low pressure. The injector works on a ventrui system that can only pull chemical at low pressure. Depending on ...

cant get soap to come out of resevior the soap is not feeding through the resevior tube it only will pull soap with the large hole tip or no tip very low pressure 

...to mix with sprayer of Honda gc190 Power Washer. soap will come out of soap container and through hose, but won't cyphon into spayer? they only pull the soap out with the low pressure ...

thriugh the tube It spray with pressure but no soap release The wand has a high and low pressure setting. When it is set to high pressure, no soap will come out. This is the way it is designed to work