Questions & Answers for: singer quantum xl 1 needle

Quantum XL 1000 Singer Sewing machine that needs a throat plate. I am in need to find this piece. Please can you help? does the hook assembly move when you rotate the handwheel? If "no" then the lower

Singer Quantum XL1 jammed I went to do a stitch pattern, and the needle broke (it isn't in the bobbin case...was all intact and I removed and replaced it), turned it off for 20 mins (system is ...

...singer XL 5000. Seems like after i cleaned lint out of bobbin area i started having the problem The needle thread breaks 1. the needle thread is not threaded properly 2. The needle thread tension is ...

...Singer Quantum XL-100 Sewing/Embroidery machine that repeatedly and frequently breaks needles. In one 10-minute sewing session, it broke six needles. The tension at the top of the machine i I ...

...Singer Quantum XL-1. After replaceing the needle bar stopper, now the machine will start to embroidery, but when the need goes to the right, it stops going up and down. Is there something that needs ...

...needle to break? With the clicking noise it sounds like your timing is off. 1. Check this: With the bobbin and bobbin case out. 2. Now: Move the hand wheel and watch the needle under the plate. 3. As ...