...signal message on the monitor just indicates that it isn?t detecting a video signal from the PC. Could be a lot of simple things so I wouldn?t give up on it just yet. 1)Is the computer actually on? ...
...monitor will not power on, do you see a message like "No signal detected" or anything like that or do you get nothing what so ever? To verify it's not your system, connect a VGA monitor to your ...
Question about Compaq Presario SR2013WM (RE468AA#ABA) PC Desktop
...monitor doesn't work, then the problem is the VGA card. Hope this helps. Does it display on your monitor "No Input Signal"? If so it could very well be your motherboard. Same thing happened to me.
Question about Compaq Presario CQ70-120US Laptop
...you need to do is connect a monitor to the video port on the laptop, then power up the monitor first then boot up the laptop. The video signal will automatically divert to the external monitor
...signal to monitor. Tried different monitor and cable. Same result. Bad video? Bad motherboard? Try with a different cable, the pins may be bent. If this isn't working get an additional video card and ...
Question about Compaq Presario SR1720NX (EL435AA) PC Desktop
...signal to monitor I have an sr1720nx compaq presario and the monitor is not getting data from the pcu properly. I used my laptop to check the monitor and the monitor works fine. what can I do? Try ...
...signal on monitor If there's no signal on monitor. Try to check the cables connected to your monitor. To isolate the issue, test that cable to a different monitor, or test that monitor to a different ...
Question about Compaq Presario SR2170NX (RK549AA#ABA) PC Desktop
...monitor signal after reboot cable is loosly connected at the back of the monitor or the computer// unplug ang replug it proberly and firmly/ if that does not work then check the pwr outlet wit other ...
Question about Compaq Presario SR1211NX (829160534404) PC Desktop
...SIGNAL TO MONITOR Make sure your monitor has power and that the VGA cord or USB cord is properly connected. If your monitor has power (power light is on), disconnect the VGA or USB cord from it, but ...
...monitor not receive the signal from the computer. the monitor light goes orange and do nothing. Thanks for your help! Marcos Osorio Puerto Rico Hello, You should check your monitors connection to the ...
Usually answered in minutes!
1,757 Questions
347 Questions
315 Questions
269 Questions
198 Questions