Questions & Answers for: sewing machine opening hand wheel

Question about 3116 Simple

2 Answers

hand wheel toward you (counter clockwise) and lowerthe needle into the hole in the plate. Turn the hand wheel until the needle rises back up to it's highest position. Gen You will see a loop of thread

Ad

...hand wheel clutch to engage motion of needle and shutter. if not check belt on downside of hand wheel open cover motor,loosen bolt cover see belt check if engage on pulley by holding hand wheel move ...

Ad

Question about 3116 Simple

2 Answers

...machine there an opening to see the top gear assembly,this should be done by service technician.try to bring to nearest service center if still under warranty claim this for lesser maintenance ...

...sewing machine Model 1780 I need to find the oiling points and how to open the machine where they are. There should be two screws on the top of the machine. Those need to come off first. Most Whites ...

Question about 1780 Sewing Machine

1 Answer

...sewing machine with a shuttle hook, then you can alsofollow these: 1. Disconnect the sewing machine from any power source.Loosen the thumb screw on the left side of the sewing machine body and ...

Question about Lily 540 and 550

1 Answer

...up anything else on the machine. This is not a bobbin problem it is the hand wheel. You should be able to pull the cover of the hand wheel off. Just firmly grab the hand wheel and pull straight

Question about Lily 540 and 550

1 Answer

...Machine has a Clutch & It Needs to be Released. The Clutch is this little dial that is inside of the hand wheel. In older machines, it was used to wind the bobbin without the needle going up and ...

...hand wheel CLUTCH needs tightened Did you wind a bobbin and forget to deactivate the bobbin winder?

Yep, the little wheel usually activates the bobbin winder. When finished winding, that wheel ...

sewing machine jammed with the needle bar at its lowest point, open the bobbin cover. If you see a loop of thread, try and slide that loop until it clears. If there are several loops around the bobbin

Question about Lily 540 and 550

1 Answer

sewing machine are jammed, it indicates a more serious issue that likely requires attention. Here are some steps you can take to troubleshoot and possibly resolve the problem: 1. Turn Off the Machine:

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...