Questions & Answers for: setting chime clock

...chime on the hour. Do you know what time the chimes are supposed to stop and then restart in the mornings? any advice appreciated. See this site ...

...chime settings on the back of the clock to the middle setting (chimes on 24 hours) I carried out this until the chime was right for the time i was working ( in my case it was 1730) so when it reached ...

...Chime wall clock The next time it chimes multiple times turn the hour hand clockwise until it is pointing at the number of times it gonged. Next take off the dial nut off (make sure to put it in a ...

...chime is now programmed. Instructions for Chiming Anniversary Clock - Bill's Clockworks https://billsclockworks.com > instruction-sheet.html Search for: How do you set the chimes on an anniversary ...

...setting your clock, when you go pass the hour you have to let the clock chime completely, if you do not do this you can damage the time sequence..You have to reset the chime cable or belt...but ...

chime on the hour from 6 am to 9 pm if it is a digital clock with a chimer the set it to 12 hour and not 24 hour make sure that the chime has a good battery in the chime circuit and it is set to chime

setting your clock to next hour of chime n then move the hands of clock to next hour n your clock will chime accordingly..... in this way waiting for chime to finish ...set to clock to present time ..

...chime clock. On/off/auto, start/set, H 2 buttons, M 2 buttons, volume wheel, test button and a wheel to adjust hands. I have no manual. What do these do so I can operate it? Step 1 Wind your clock ...

clock chime is to move the hour hand to the hour that the chime is striking. Make sure that the hour hand shaft is not too tight or else it will not turn. Most mantel clock hands are friction held. DO

chime setting. Once you have set the time and chime settings, replace the clock on the wall or mantle. Note: It is important to set the time accurately and synchronize it with an accurate time source,