Questions & Answers for: Ford replace vct solenoid

...camshaft position sensor malfunction. P1380 ic VCT Solenoid Valve short or open. Most likely camshaft sensor needs to be replaced. The vapor canistor solenoid is also most likely burned or rotted

Ad

Question about 2002 ZX2

1 Answer

...the VCT solenoid is plugged in (sticks out of the top left of the valve cover) and have it scanned again to see if you got any new codes like P138x. P0340- Camshaft Position Sensor Circuit ...

Ad

Question about 2007 F-150 Harley Davidson

1 Answer

...Replace the solenoid, remove the rag and reinstall the cover. Be sure to remove the rag :o) That being said, the main cause of VCT codes or a noise from the VCT is caused by the camshaft phaser. This ...

Question about 2007 F-150 Harley Davidson

1 Answer

...VCT solenoids with no help. They appear to be operational mechanically, but I have not yet checked to see if they are being pulsed. On the oil pressure issue: test the oil pressure with an external ...

Question about 2004 F150

1 Answer

2007 f150 w/p0022. They are recommending to me a new engine. The phasers supposedly have been replaced. Where is the extended warranty you were talking about? Thanks P0022 would be bank 2 over-*******

Question about 2004 F150

4 Answers

...VCT) had a peice of plastic stuck in it took it out so far so good P0011-A Camshaft Position-Timing Over Advanced or System Performance Bank 1 General Description The CVVT (Continuously Variable ...

Question about 1999 Contour

1 Answer

...VCT solenoid valve stuck open Camshaft advance mechanism binding (VCT unit). Read more: https://www.autocodes.com/p1381_ford.html probably the cam sensor, sometimes the sensor can get damaged or the ...

Question about 2004 F150

1 Answer

2004 f150 runs rough replaced MAF, VCT solenoids, plugs and COP, one code says too lean bank 1, others have finally been cleared included too rich bank 2, misfire 2 and 3, misfire first 1000 revs. ...

...and coil packs new catalytic converters cleaned the throttle body upon putting the vct solenoids in I started my truck and it ran horribly and stalled. Your O2 sensors are faulty , replace all

replace your engine oil and filter if past due or low. P1383 code possible causes Cam timing improperly set Continuous oil flow to the VCT piston chamber VCT solenoid valve stuck open Camshaft advance

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...