Questions & Answers for: replace vct solenoid

Ad

...and repair steps are: Carefully inspect the Bank 2 VVT/VCT system circuit wiring and connectors, repair as required With a warm engine, test the operation of the OCV, replace/repair as ...

Ad

replace the fuel filter due to the fact it is in the tank,and not able to service it. It does it the whole time driving only while accelerating, I did how ever receive this trouble code twice P0011 in

Ad

Question about 2006 Impala

1 Answer

...camshaft position sensor malfunction. P1380 ic VCT Solenoid Valve short or open. Most likely camshaft sensor needs to be replaced. The vapor canistor solenoid is also most likely burned or rotted

Question about 2006 Impala

1 Answer

...system circuit wiring and connectors, repair as required * With a warm engine, test the operation of the OCV, replace/repair as needed Hope this helps to solve it (remember to rate this

Question about 2007 F-150 Harley Davidson

1 Answer

...Replace the solenoid, remove the rag and reinstall the cover. Be sure to remove the rag :o) That being said, the main cause of VCT codes or a noise from the VCT is caused by the camshaft phaser. This ...

Question about 2007 Accent GS Hatchback

1 Answer

...VCT solenoid. You're looking for a sticking or stuck VCt solenoid valve caused by contamination. Refer to vehicle specific repair manual to perform component tests for the VCT unit. Notes: Dealer ...

Question about 2004 xB

1 Answer

...and repair steps are: Carefully inspect the Bank 1 VVT/VCT system circuit wiring and connectors, repair as requiredWith a warm engine, test the operation of the OCV, replace/repair as ...

Question about 1999 Contour

1 Answer

...VCT solenoid valve stuck open Camshaft advance mechanism binding (VCT unit). Read more: https://www.autocodes.com/p1381_ford.html probably the cam sensor, sometimes the sensor can get damaged or the ...

...VCT solenoid does to control emissions. So more or less stuck in advance position. When I do clean the solenoid and replace it will it tell the engine to slow down the timing or will I have to adjust ...

Truck shakes bad and stalls I've replaced plugs coil packs vct solenoids and new o2 censors problem started when I cHanged vct solenoids ANY CODES?COULD BE MODULE.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

21920 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...