Questions & Answers for: Oldsmobile Intrigue remove rear wiper arm cap

Question about 2002 Intrigue

1 Answer

...remove the wiper arm from the post of the wiper motor? first remove the bolt or nut that is on top of the shaft,. the wiggle the arm while pulling it off the shaft. that should do the trick. tnx 4 ...

Ad

Question about 2000 Intrigue

2 Answers

...Wiper Arm How do you remove the windshield wiper arm from wiper motor post? Pull up on the wiper arm, you will see a tiny little blade on the side of the wiper arm where it goes over the post, take a ...

Ad

Question about 1999 Intrigue

2 Answers

...and swing arm. it is the little metal piece that connects the wiper arms together. they click into place and hold the arm to the swing arm. that is probably why you have play and they arn't

...rear view mirror.Now it won't move at all. Please help. Thanks, Bill hi bill im scott, im sorry to be the one that has to tell you this but it might be that you have rounded the main motor arm which ...

...wiper crank arm that is bolted to the wiper motor needs replaced. Also there is a tab on the wiper motor bracket that gets bent when the arm goes bad. Bend the tab back up so the new arm will contact ...

Question about 1999 Intrigue

2 Answers

...like one of your rods is off for the wipers. You will need to remove the cowl cover to access the arms and see what needs to be replaced. sounds like the nut has came off the wiper motor on one ...

Question about 2001 Intrigue

1 Answer

...wiper arms can sometimes be a challenge to remove and often require a small two jaw pulley to press them off from the posts. If you can get the wiper arms off the rest is a breeze as long as you have ...

wiper arm base,a plastic cover at the bottom of the arm. If you pop the cover off there is a 13mm nut that holds the arm,they come loose ,just turn the wipers off and set the arms where they should be

Question about 2001 Intrigue

1 Answer

...wiper going off windshield, will not seat down on stop If it's only doing this on the driver's side,you should be able to remove the arm and reinstall it "clocked" in a different position.I ...

Question about 2000 Intrigue

2 Answers

but doesn't. might be the motor itself is burned out. I have this problem, the wiper arm is stuck on with bubblegum. Replace the wiper arm, it will allow the bubblegum to stick better. NO JOKE

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...