Questions & Answers for: Brother MFC reinstall tray

reinstall tray" message won't clear can't get the "reinstall tray" message to clear. I have checked that the tray is ok, but the printer won't recognize it's installed. Just scroll down the page and u

...report paper out once it starts to cycle through a print job (before printing). After removing and reinstalling tray there is no paper lift. Power cycling the printer causes the paper to lift and ...

Tray #1 - Reinstall Tray" I get this Error Message "Check Tray #1 - Reinstall Tray". As though the tray is not inserted completely.... I have tried removing and re-installing the tray several times as

check tray#1 reinstall tray check tray#1 ,reinstall tray I took the printer back to Costco!

reinstall tray#1, never goes to ready. I tried to reinstall the tray, but the machine never goes to ready. Here is a solution I found posted by Razor. (It turns out my engine controller board is bad.)

...reinstall the tray. the tray is in and has paper, but still the same error. That error, usually means that the engine PCB is bad. If you call brother they'll tell you to check the print count, and if ...

Message comes up on screen "check tray #1 reinstall tray What does this meen, nothing has changed accept moved to new spot in office. simplly open your tray, and reload it, refer your manual, for ...

...reinstall tray message I have a Brother MFC-9440CN Laser Printer - it says to re-install tray - the tray is in it - we have to just open and close the tray drawer and rub the feed button to make it ...

...tray reinstall It ses "no tray reinstall tray" even though the tray is correctly in place. What can I try? it sounds like the tray is not seated. pull the tray out make sure the paper is ...

...reinstall the software/// Just fill paper tray half way till you get it to work so there won't be a paper jam, these printers are bad about doing this when you let the paper run out. Now unplug ...