...pedal, but the needle will not go up and down. Do you have any idea what could be the matter? I really appreciate any advice you can give. Thank you. Tighten the inner knob on hand wheel to make the ...
...pedal the needle will not move. I can manually turn and get the needle to move but not with the foot pedal. Make sure that the bobbin winder stop is up. That is the little black post below the bobbin ...
forward or backward. But needle does not move when I use the foot pedal. What's wrong? the clutch is out. that allows you to wind a bobbin. take it out of bobbin mode and put it in sew mode (clutch in
...move. Refer to your manual and make sure the bobbin winding feature is disengaged. Turn off the power and remove the needle and if there is fabric, remove it also. Open the needle plate look for ...
...move, manually or by pedal. I cleaned out all of the thread and removed the needle. Unscrew the needle and you should be able to move the balance wheel, take the needle out and then look for thread ...
pedal and it powers the machine and does not go up and down. The needle and needle bar go up and down. If there is a smaller wheel in the center of the handwheel (wheel on the right side of the sewing
Question about LS-2125 Mechanical Sewing Machine
...needle on my sewing machine won't move. The pedal makes a noise but nothing happens. The hand wheel doesn't turn either. Please help this is the first time I have tried to use it and ...
Question about LS-2125 Mechanical Sewing Machine
...needle moves up and down, then the gears are probably alright. It could just be the floor pedal is oxidized and not making good contact so isn't allowing electricity to get to the motor. If you know ...
Question about LS-2125 Mechanical Sewing Machine
...pedal, but it will move with the hand wheel. I can hear the motor working/spinning but there seems to be a disconnect to the needle. I opened up the machine to oil it because the needle was squeaking ...
Question about LS-2125 Mechanical Sewing Machine
pedal and needle doesn't move. I just got a brand new Emerald 118 for xmas. I sat down to use it for the second time and when I press down on the control pedal the needle doesn't move. If I wait a bit
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
