Questions & Answers for: Lakewood how to open a fan

...box fan. When I turn it on high, I usually insert a foot long piece of wood in through the corner openings of the front and back grill to stabilize the fan. A 1/2 inch wooden dowel or .5"x1" slat, ...

...than replace Maybe you tripped over it so hard you de soldered the wires form the inside. Have you openned it? Try it out if you didn't. Check the power cord and follow it all the way into the motor

...blue can oil or zoomspout) in that area and if you can take off the motor and oil the back opening. Reasemmble the fan and run it for a little

...not turning you may need to unplug and try to move the fan motor by hand this may take a few tools to open the unit and see if its stuck if it is try sprayin the motor shaft with wd if ti turns by ...

...Fan LWTF-42/RC-DLX. How can I open it to clean the blades Open the grills and use a long stem tipped with cloth dipped in kerosene to lightly clean the dust. Then use a similar arrangement of dry ...

...fan capable of being opened, because it has become dirty and I would like to clean it. Thank you You can for sure open it and clean it ... use Proper Tools and Protective equipments . Unplug Supply ...

...fan blade. You have to open the cover and remove the fan blade from the motor. There might be a set screw on this one. Some just pull off. Once you get the hair removed, confirm if the shaft is easy ...

...fan stopped in mid-use it is probably the thermo protection located under the shrink wrap where the blue power wire comes into connection with the motor field winding. The continuity between the plug ...

...stopping the fans with his hands,now the fans wont even start ,yet at all hum.how do i fix this? i opened the fan everything is still new,not burn.and in tac replace the ...

open this fan ????I am desperate sounds like ya screws are stripped in the plastic housing if you can keep trying im sure the fan will open but if not go around the sides with a flat head screw driver