Questions & Answers for: Chrysler LeBaron oil pressure troubleshooting

Question about 1989 LeBaron

1 Answer

...as long as there is oil pressure there it means parts are getting lubed. But if it happens to drop to 0psi look out. If still worried go ahead and replace the pump but I think you'll be just

Ad

...oil pressure switch My friend has a 1993 Chrysler LeBaron. I was wondering if it has a oil pressure switch as a safety feature to prevent major damage from occuring if it were to run out of oil. ...

Ad

...fuel pressure with key on... should be 40-50 psi on multi-port. 30-40 on TBI PS If the auto shutdown relay quit then you would not get a start at all. PSS oil pressure will cause a similer ...

Oil pressure drops to nothing and engine stalls Just purchased a used 1989 Lebaron with the 2.5L Turbo. Originally the oil pressure would drop to nothing and occasionally stall. I changed the oil pump

Question about 1991 LeBaron

1 Answer

oil pressure my car drives and starts just fine but out of nowhere usually after stop signs what can i do?? use a thicker oil. try 20w50 at your next oilchange, or try an additive for older engines to

...oil pressure goes up and temp goes down but when i stop my oil pressure goes down and my temp goes up???...what could this be a valve cover leak is what i was thinkin... Valve cover leak (oil) will ...

Question about 1994 LeBaron

1 Answer

...pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.   To confirm the problem, the basic ...

Question about 1988 LeBaron

2 Answers

...pressure which will cause the oil top leak from everywhere possible For oil leak problem,its suggested to click the link below and check the troubleshooting procedure :----Oil pouring out from ...

...one of the gauges is registering an abnormal reading, like low oil pressure or an overheating engine. Hence the warning of CHECK GAUGES" Please read your owners manual for more info on this

...oil level in the transmission to check for oil leaks . Run fault codes and look for a fault in the TCM unit or wires not connected properly. Have a pressure test done to check for internal

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...