Questions & Answers for: Protron does not power on Computers & Internet

...not on my Tv power light is not coming on even though I unpluged it and used a different outlet. First make sure it does have at least red indicator on the front panel, if not, the standby +5vdc is ...

power to tv but will not turn on no remote do not have emote for tv bought it used but it will not turn on when i press the power spot First make sure it does have at least red indicator on the front ...

not turn on. No power light I pressed the remote power button to turn the set on, the indicator (red) light changed to green, but the picture would not come up. I pressed the remote power button again

...power supply circuits are not digital so it is easy to service. I am an expert in power supplies. The power supply in an HDTV. Is the standby light at the front of the TV on? If not then the standby ...

not have power my tv does not have power Common problem in this TV is failed power supply module due to bad caps, transistor, diode. Check the power supply; look for bad caps with leaking/bulging tops

...not lit to say its getting power. Its a PLTV-3250, 32" LCD tv. This is common problem with the PLTV-3250, the power supply DC filter caps go bad, 5vdc standby transistor and diode shorted out. Check ...

power light not lit Check the power supply; look for bad caps with leaking/bulging tops, check to see if you have standby +5vdc at the power supply connector, the front red indicator will not be on if

...not getting power past the power cord Typical failure in this model is the power supply module. Check the power supply; look for bad caps with leaking/bulging tops, check to see if you have standby ...

...outlet with no luck. What do u think? No power when plugged in at multiple locations. Red stand by power lamp is not lite... as if no power to the tv I think your Proton TV has power supply ...

...not power on ,it indicates the power board is not powering up at all- you may have a blown fuse on the power board You can replace it by removing screws on back of the set and the entire rear panel ...