Question about Norstar 16-Line PBX Speakerphone
...speaker. you can make calls, and it stops. But as soon as you hang up, it starts again. IF ITS A NORTEL TRY DOING A FEATURE #86 TO TURN OFF MOH MUSIC ON HOLD OF CHANGE PORT AND REBUILD EXT AND THE ...
Question about GN 9120 Professional Headset
...nortel phone in a VOIP setting. On our old Meriden system we were using the GN9350 headset with the GN1000 lifter. We are able to use it with this new system if we are by the phone to hear it ring. ...
...speaker button. You have lost system programming. Unless you are well versed in getting into your system with the installer password, you need to call a Nortel service tech. The older systems have a ...
Nortek T7100 crackling coming out of the speakers when handset is down. It could be that the background music feature is turned on but doesn't have a misic player attached. Try entering in feature #86
Nortel Polycom 2033 IP conference unit. When we have a conference, it's really bad sound quality. Is there anything that i can do? Thanks. has it always been like that or it just started. this can
...Nortel T7316E primarily will increase the speaker volume. If the problem is that your microphone is too low, you will need to use an amplifier, the M22. Remember that the amplifier needs to be ...
speaker on M7310 I've had Nortel Norstar m7310 phones for years and the entire time that I've them, I've never used the speaker phone. I could hear them, they couldn't hear me. At this
...speaker on the phone We recently moved to new office space and the cubicle are now closer together and I would like to disable some of the speakers on the phones in the area so the pages are not so ...
NO DIAL TONE ON HANDSET ONLY SPEAKER. PHONE RINGS BUT CANT USE HANDSET Check that the handset is plugged in correctly (some phones have a jack for a headset as well as handset. Try another handset. ...
Question about Business Series Terminal T7316E
...Nortel tech support . I am assuming the page is over your set and not an overhead speaker. The setting is in the configuration programming of your system. Recieve page must be set to 'n' in the ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions