...the phone using a normal line so that only Line 1 is "hot", don't leave it on this double-connected cable any longer than you need to in order to program the extension. Now it should work. Good
Question about Handset Cordless Telephone with Caller ID TRU-8860/2 (TRU88602)
...normal and they will continue to do so until you "assign" the phone its intercom number. If you have more than one of these phones, go to your other phones, lift the handset and see what intercom ...
...phone. Everything is great except the intercom button keeps blinking both red and green. I can't see anywhere in the manual that this is normal. I also can't find out why it is doing this and how to ...
Question about 2-9450C Corded Phone
...phone using a normal line so that only Line 1 is "hot", don't leave it on this double-connected cable any longer than you need to in order to program the extension. Good luck! My Intercom light ...
...phone, by pushing the intercom button and entering the other mode. To put the phone back into regular mode, all you have to do is switch off the intercom option. Contact your telephone provider. Some ...
...normal intercom easily (But with slight difference). You can connect to different mobile phones at a time. To use this service just simply ask your service provider to enable the service for your ...
...plug it back in, perhaps that will work for you. Ours always flashes when we do that but if you have a cell phone, just call your landline and it should return to normal. Hope that
...phone that is interfering? Normally these should work well up to over a hundred feet for sure. Try swapping channels on the intercom units and keep away from metal (Like a refrigerator) and
...normal extension to extension call instead of intercom/page. Hi Raeganin themiddle of the handset will be a button which is lit this button will say auto answer mute around it. Press this button will ...
Question about 1090020 DSX 22Button Display Phone Black
...Intercom will take care of it. We had a phone for which that didn't work. In that case, use DSX System Administrator 3 to reset the station port. On the left side of the main window, click Reset ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions