...needle (or the pickup head) doesn't make a change, try to realign the weight on the tone arm so that the pickup head will become a bit heavier, this could help somewhat (before you actually try to ...
...needle but the issue still exists. Also cleaned all the records. If a few used/old ones skipped I'd understand but it is everyone. Help There's not enough pressure to keep the stylus down in the ...
Tone arm skipping records. Im not really sure what is the cause of this problem, but my needle keeps skipping records on one of my technics 1210. ive adjusted everything that can be adjusted and even ...
Question about SL-1200 Turntable
...needle skips like my record's scratched and the tone-arm doesn't return at the right spot when the record my pristine records skip like they're scratched, I have a brand new needle ...
needle skips across record needle is skipping across record your tone arm needs rebalancing most likely
Question about PS-LX250H Turntable
...tone arm. This weight keeps the needle on the record but only lightly when positioned correctly. If positioned too far from the pivot post the needle will as you have experience skip virtually ...
...to balance the tone arm so that the needle is held in the record groove, by the minimum necessary weight on the needle. Hope this is helpful, if so would you please register that with Fixya ...
Question about PS-LX250H Turntable
...tone arm won't progress. It consistently stops (skips) regardless of whatever album at the same place Hello, so the needle can''t stay in the groove. Can you easily move your tonearm from left to ...
Question about Radio CR704 Musician Entertainment Center, Turntable with Analog AM/FM Radio, CD Player & Cassette Deck, Paprika
needle is worn out or damaged and is why tone arm will not track in record groves. replace needle cartridge, links below will show what and how. press the helpful button. Accessories Replacing Crosley
Question about Radio CR704 Musician Entertainment Center, Turntable with Analog AM/FM Radio, CD Player & Cassette Deck, Paprika
...tone arm is 'hopping'; that is, bouncing up and down. Either the turntable platter or the motor itself is not moving freely and causing a vibration. If it is just 'skipping the needle is not going ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions