Questions & Answers for: Dodge miss firing 6

6 cylinder miss fire i replaced the injector repaced coil there is spark and power on the injector but it keeps on throwing the code that number 6 is miss fireingi need to find out how to resolve this

firing orders. like how they number the cylinders. if anyone knows it would be great. email [email protected]. thanks 1997 Dodge Avenger 2.0 liter DOHC L4 VIN "Y" 1997 Dodge Avenger 2.5 liter SOHC

...fling all over if any wires are damaged. also check the fuel filter and last when was the last time that you replaced the catalic converter?? well it should be firing on 6 cylinder since it is a ...

miss fire cilinder number 6 i did tune up just week ago See if you cross two of the wiresto the wrong cylinders It will start and run ruff this way

...miss fireing i have a 1975 dodge D100 with a 318 v8 motor and would you know the fireing order cuz the engine wont start it will fire but wont run The correct firing order for the engine is ...

2005 Dodge Caravan SXT, V-6, missing and back fires when accelerating. is the check engine light blinking? if so have it tested for codes, Kragen auto and others do this test for free, just ask for a ...

...miss fire in cylcinder 6. but no one can find the problem van runs great first do a cylinder compression test on engine to verify good engine compression this should be around 110psi to 175 psi check ...

What makes an engine miss fire on cylinder 6 Bad plug, shorted plug wire

...is required when I get code po306 Miss-fire detected at cylinder # 6 . If it feels like it is running rough (miss) try pulling plug and inspecting to start with and make sure plug wire is on

miss fire #6 cyl 2000 dodge 3500 van 5.9 egine replaced:plugs, points, rotor, cap, wires, injector. compression about 100 hot 100 PSI is way to low, I think you have a burnt valve. Check the cylinder ...