Questions & Answers for: Ford Expedition miss firing

Question about 2000 Expedition

1 Answer

missing and back fires while driving truck is missing sometimes and back fires while driving this start when i just fuel up water in fuel

Ad

...cylinder has the miss fire. IE: P0301=missfire in cylinder #1 and P0308 is miss fire on #8 There should be other codes to, that would indicate why they are miss firing. Good luck and hope this

Ad

Question about 2003 Expedition

1 Answer

miss-fire i have a 2000 exedetion xlt 4 wheel drive 5.4,runs rough has mis-fire on 1,2an4 an can smell ehaust fumes,sounds bad,dosen't smoke,can only drive 30-40 miles per hour try replacing coil ...

...miss fire If your spark plugs are working ok, you may have a broken wire coming off the plug in #3 slot. Start by pulling the plug wire off and inspecting it for any abnormalities. If that isn't it, ...

...miss firing.Hope this helps. Please leave comment. you may have an engine miss fire. you can go to any parts store to have them check for trouble code at no-charge. after you know what's wrong with ...

Question about 1997 Expedition

1 Answer

...miss firing in the third cylinder. Replaced all ignition coils and sprak plugs also fuel pump. After 100 miles it started with the same symtoms? What else could it be? It could be a bad computer that ...

...firing on all 8 cylinders. Definitely, check out what other codes are stored in the computer besides a missing condition. I have a 1999 Expedition that had a miss on a cylinder, and it turned out to ...

...miss firing so took to an auto hobby and they said that the plug in cylinder 7 was covered in oil. What could be some causes of this? Could be broken piston oil ring(s), bad valve seals... Have them ...

My 1999 Ford Expidition has a miss fire. It Idle's up and down at light, is worse when air conditioner is running. Check Engine light keeps comming on with mulitiple miss fires, changed both coils, ...

Question about 1999 Expedition

1 Answer

miss fiers i check plugs, coil, cylinder, There are frequent problems with the parts you already replaced. The crank sensor and cam sensor can affect firing. Check intake for vacuum leaks with a water

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

1998 Ford Expedition
1998 Ford Expedition

1,627 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

Manuals & User Guides

Loading...