Questions & Answers for: mic switch

shure wireless UHF microphone we have a set of shure wireless UHF mic we use in our local church services here in Caloocan city, Philippines, around 3 wks ago, one of the mic (it came with 2 pcs. ...

...mic. The switch could have malfunctioned. However I repeat, that I believe the mic has malfunctioned. I hope this helps, Shuttle83 I have tried multiple mics and the problem with the busy light is ...

...switch line mic is in mic pos. and the external mic not work in that camera. You have to switch the CH1 and CH2 switches inside the lcd display to input 1 or input 2 to control the xlr inputs. If ...

...the connectors and settings. When I disconnect the module, the internal mics pick up fine. mics have any on off switches? look for a switch labeled internal external mic. Could be in the menu. ...

...Mic On/Off switch located? In other words, what components are between the mic and the Mic switch? The switch is between the Mic element and the output connector. Depending on the type of microphone ...

...mic switch switched from receive and transmit. When the mic is not keyed then the switch is actually on receive, and when you key it, you switch it to transmit. So if there is something wrong with ...

...After connecting the mic to the mixer,activate the phantompoweronthe mixer and switch on the phantom power on the mic,and problem solved. Note: Mic will not work if no phantom activated on the

...nest may be switched to the speaker output mode. Open Realtec's control center(in control panel or quicklaunch icon) and check in mic nest to "mic mode" or switch mode from 5.1 to stereo

...switch the mic input from the built-in mics to XLR input? on the left side of the unit there is a small switch , , set this switch to MIc , or if using a condenser mic set to phantom-mic this gives ...

...mic transmit switch the red Tx light comes on for the selected band. Releasing the mic transmit switch the red Tx light remains on. I have to turn off the rdo to stop transmission. Turn rdo on again ...