Questions & Answers for: line in use norstar

NorStar M7208 I have a 2 line phone...the second line shows "as in use" but no one is on that line, but I can not get the line to release. HELP! Reboot the phone system. Unplug the main control unit.

Line in Use I have a Norstar M7324. We have 4 lines. Line 1 and Line 4 is in use. No one in the office can't us line 1 and line 4. What should I do Try pressing Intercom then 9. Should redirect you to

Line 6 on Norstar System to Ring Different I have a Norstar phone with 6 incoming lines. The sixth line is for another company within our building which I must answer with a different company name. I

...numbers? using t7316e handset. Thanks You need to go into system administration and setup "Target Lines" for each DDI number. Then assign the Target Lines to telephones. Please refer to your ...

Norstar 7324-two lines show in use, but wont hang up One of the incoming lines seems to be connected to itself and both line 3 and the corresponding incoming line show In-use. But neither is able to ...

...and when our Meridian M8X24 phone system with T7316E phones came back up we only have access to 2 lines. How do we gain access to the other lines again. Sounds like your norstar system needs to be ...

...Norstar M7310 5 line phone 2 lines say they Have Norstar M7310 5 line phone, 2 lines say they are in use, but they are not? Checked and unplugged phone, still say "in use"? You need to unplug ...

...line I have a NORSTAR M7310 and have multiple phone lines coming into our office. These phone are only capable of being programmed with a few lines. All I want to know how to do is swap one line for ...

Line 2 on our home Norstar Compact ICS system (using M7310 phone). We used line 2 as our fax line and the trunk was directed into the analog connector in the ICS. When a call comes in the line appears

How do i release two lines stuck on a Norstar phone Seems to be a known issue. The normal way is to disconnect the main control box unit. There is a video in the link ...