Questions & Answers for: l5 code treadmill

L5 code appears after it stops on the Z500 Treadmill Z500 Spirit treadmill shows a L5 code after it stops. The treadmill appears to start OK, but then stops after starting on the slower speed. What ...

...code L5??? I have a Landice L8 and the error code L5 keeps coming up, How do I fix it? LS Error on Landice L-Series Treadmills with Belt Movement Probable Cause A LS error on the Landice L-Series ...

...L5 code what does it mean? I have just purchased and assembled a free spirit treadmill - plugged it in and it starts and appears to be working - then 10 second it shuts down and shows L5 in the time ...

error code L5 on schwinn 820p Landice L9 tredmill, L5 display on screen,belt runs slow and nothing else works to the touch.

...code L5. Can you tell me what this error code means? Thank you. Tim Dear Sir:I just want to say to L5 means many things.1)You must check socket wiring from upper board(display) vs lower ...

code L5. I would like to know how to fix my treadmill. It's a freespirit, has been working good till now. It will go through the cycle of trying to start but it comes up with a code L5. check this

L5 code after ten seconds from start up i recently replaced the speed sensor and still get L5 code If you have a known good speed sensor (reed switch) and you have tested it with an ohm meter (even ...

...L5 and this error code means there is a loss of speed signal. If this error occurs with no belt movement, the causes for the LS or L5 error are: A) Faulty upper display board or faulty relay board B) ...

code L5 mean on treadmill,no movement on the treadmill Hello, Lynette -

Is the error code really L5, or could it be LS?

Also, it would help to know the make and model of your treadmill.

...Code reading is L5 soo what is the problem When I start treadmill it will start slow picks up speed by it's self then stops. Code reading is L5 what does that mean? What is wrong? Hi there! L5 ...