Questions & Answers for: janome stitches problem

Janome 1600P DB Stitch length The stitch length varies from 1/16" to 1/2" while making a single stitch line. I've adjust the tension - it doesn't help. There's nothing in the manual to help with this ...

...stitches are lumpy. My Janome machine is new. Could the factory settings be wrong. I have sewn for years on other machines. First time on this machine and I can't get stitches even. Thanks, Linda You ...

...and I am wondering if that is causing the problem. Janome 660. Hi. Try holding the top and bobbin threads while taking your first few stitches. Let me know if that helps, ok? Happy Sewing! ...

Stitch regulator not working properly I bought my Janome 694 in Feb 1977. I have long had a problem with regulating the stitch length. I leave the stitch length regulator on the highest/longest stitch

helpdesk com I have a Janome MB-4 Embroidery machine with a RCS unit. I can not find anything in my Instruction Book for the problem. The bobbin ran out of thread but the machine kept stitching. I ...

...Have someone watch while you sew. Otherwise, assuming this is a newish machine, I'd complain to Janome customer service and tell them it's been in for repair 3x and you'd like a replacement ...

...Janome Newhome 672 sewing machine In most cases Laurie, with decorative stitches selected some machines can't sew in reverse. Your stitch length is too long or too short to make the decorative ...

...Janome 6500P with stitches since I had service stitches are loose on top of fabric on Janome 6500 and bottoms stitch has loops Sounds like a threading issue.
Be sure to install a brand new needle ...

my Janome Sewist 521 sewing machine problem .The stitch pattern is stuck on F stitch pattern. Is there anything I can do to fix it? Or do I need to take it to a sewing machine repair shop ? I would ...

...Janome 3160 QDC trying to use stitch 26 decorative stitch and it just started sewing distorted stitches and the top thread gets fuzzy. Top thread is "frayed"? Could be tension is too high, problem ...