...IP Configuration thing forever. :| Im my case the phone does not seem to be pulling the config properly because it can't locate the tftboot server.. check out my solution: ...
...config)#ip address fo 192.168.1.1 255.255.255.0 !--- Assign an IP address. Failover Commands PIX(config)#failover ip address fo 192.168.1.2 !--- IP address for the failover link. PIX(config)#failover ...
Question about Catalyst 2960 8-Port Ethernet Switch (WS-C2960-8TC-L)
...config-if)#ip address 172.225.18.100 255.255.254.0 ^ % Invalid input detected at '^' marker What am I doing wrong? you want to give IPs to your VLANs and also make physical interfaces members of a ...
config-if)# ip address 10.91.24.5 255.255.255.0 ASA5505(config-if)# no shut ASA5505(config)# interface Vlan 2 ASA5505(config-if)# nameif outside ASA5505(config-if)# security-level 0 ASA5505(config-if)
x y.y.y.y where x is your IP address you wish to have and y is the subnet mask example below: router#config t router(config)#int f0/0 router(config-if)ip address 10.0.0.1 255.255.255.0 hope this helps
config-if)# ip address 192.168.1.1 255.255.255.0 ASA5505(config-if)# no shut Step 2: Configure the external interface vlan (connected to Internet) ASA5505(config)# interface Vlan 2 ASA5505(config-if)#
...config my DSL acount in " cisco 857 Router " ? with a dialer interface: interface Dialer0 description $FW_OUTSIDE$ ip unnumbered Ethernet0 ip access-group sdm_dialer0_in in no ip redirects no ip ...
Question about 3845 Integrated Services Router (C3845VSECK9) Firewall
...1 native Hostname(config-if)#ip address x.x.y.y < subnet mask > interface FastEthernet0/1.2 Hostname(config-if)#encapsulation dot1Q 2 Hostname(config-if)#ip address x.x.y.y < subnet mask
...mode exec user Router) ping ip show ip route show version traceroute ip mode exec priveligiado show arp show interface show protcols show ip protocols show startup-config erase startup-config ...
...IP Address, and Option 150 for TFTP Server 2) TFTP to address provided by DHCP Option 150 3) Get config file, a(an upgrade of firmware may occur at this point) 4) Connect to Call Manager/CME as ...
Usually answered in minutes!
57 Questions
67 Questions