Questions & Answers for: Land Rover intake

intake air temprature sensor i have a 2004 land rover disco where is the intake air temprature sensor located? Air intake temperature sensor is fitted in the hose from the air cleaner box to the ...

Gettting the intake plenum off a 02 freelander I have all the sensors,vacuum lines off etc..... all bolts that I see, its definately loose but not coming off. My 2002 Land Rover Freelander V6 ...

what is a valley plate and location on a 2004 land rover hse on the top of the engine block, underneath the intake manifold. you'd need to take out the intake manifold for access.

1996 land rover discovery intake manifold gasket My 1996 land rover discovery is acting funny. It is driving fine, but the intake manifold gasket keep sweeling under the intake. What is causing this? ...

...it, thank you ABU the mark on the 1.8 and 2.5 is on the rear timing belts . There is a mark on the intake cam gear and the exhaust cam gear align these with the crank on the safe and install your ...

...freelander. finally got the coolant drained......that was fun. everything is disconnected and all intake plenum bolts removed( 4 small in the rear and 4 large in the front)as specified in RAVE. ...

...says it's the purge valve. Where can I find that on my car? The canaster purge valve is on the intake manifold near the mian air intake its takeing gas fumes from the tank and sending them to be ...

How is oil getting into my intake manifold All vehicles are equipped with a PCV (positive crankcase ventilation) valve that is located on top of a valve cover and connected to the intake manifold with

how to change a 1998 cadillac sedan deville starter I do not want to have to remove intake to get to the starter If it is the 4.6L engine then you must remove the intake to change the starter.

How many nock sensors does a 2004 land rover discovery II have? Is one under the intake manifold? I only see one that is on the outside of the intake.