Question about American Standard Plumbing
...cold valve stems on a shower installed in the early 60s. I bought Danco 11k-3h/c replacement stems after matching old with new at the hardware store. They went in fine, but the valves fail to seat ...
...cold ste, 3Z-6H/C FAUCET REPAIR #1 THE FAT PART OF YOUR SPRING GOES INSIDE THE FAUCET ,AND SIT ON THE VALVE BODY(SEAT) #2 THE LITTLE BLACK WASHER SIT ON TOP OF YOUR SPRING #3 PUSH THE STEMS IN THE ...
...Danco 3H-10H/C, Hot/Cold stem. The problem is, it seems to be setup for hot (clockwise closes the valve, counter clockwise closes it). Is it reversable? Or is it not really a hot/cold valve... One of ...
...install a Danco 3G-3C cold stem in my bathroom sink Test the dripping water with your hand to make sure that it is the hot water side that is leaking. Lay a rag over the sink drain to keep parts from ...
...install a danco 10472 4z-24h/c hot & cold faucet stem how to install Shut off water supply Open faucet Remove knob Unscrew old stem Use flashlight to inspect seat for damage and corrosion. Dress ...
...faucet. Changed direction for cold water. To turn water completely off, faucet handle has to be in the middle, pushing it all the way back turns the water on again. Change the O rings in the
Question about Faucet Stem
...cold water off that is running If your having major issues, I would try to locate the main on/off valves at your water heater and pump/cold water line in the basement. One the water is shut off, I ...
Usually answered in minutes!
136 Questions
113 Questions
61 Questions
