...logic board? hi im jules_09.try checking the power supply board,trace the voltage output from the power board to the logic or main board.if the logic board is deffective there is an error that will ...
Question about PIXMA MP510 All-In-One InkJet Printer
...Logic board (QM2-3827) - Carriage motor (QM2-3872) 3 times Line feed error [6000] An error occurred in the LF encoder signal. - Timing sensor unit (QM2-3878) - Timing **** disk film (QC1-9597) - Feed ...
...logic board assembly is failed or an internal error of one of the ASIC chips on the logic board and can only be repaired by replacing the logic board at the Canon Service Center. Please rate your ...
...logic board error code (= 'other hardware error'). Before committing to replacing a logic board, ensure that the error has not been generated and held by spurious external signals. Reseat the ink ...
...Logic board ***'y (QM2-1520) Before replacement of the logic board ***'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also ...
...logic board assy and purge unit to fix it. Before replacement of the logic board assy, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or ...
...error. In most case the logic board assembly is failed or an internal error of one of the ASIC chips on the logic board and can be repaired by replacing the logic board at the Canon Service
...printer have logic board defect....you need to replace the logic board.I look in the service manual and 9000 error means to replace the logic board.If i have been useful please give me a vote ...
Logic board ***'y (QM2-0750 / QM2-0751) - Carriage motor (QK1-0175) 3 times Paper feed error - Timing sensor unit (QG4-0277) - Timing **** disk film (QC1-2781) - Feed roller ***'y (QF4-0155) -
...logic board as a culprit . You may need to check the voltage is correct at the power point and matches the printer required supply voltage. What worries me is what caused the logic board to fail and ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions